well i said screw it they were on sale for 150. so i got one. it came to day and after figuring out how to use one. i never used and electronic one before. with help from youtube. i made 100 270wsm 58 gr of imr 4350. every single one came out to 58.0 i was impressed. i also checked with my...
http://www.midwayusa.com/product/451559/rcbs-trim-pro-case-trimmer-3-way-pilot-and-chamfer-30-caliber?cm_cat=CheckoutConfirm&cm_pla=ProductDescrip
has anyone used these before. are they junk or worth it. for 11 bux i oreder one and hoping it will fit my manual hornadt trimmer.by adding this...
does anyone know if you could mate this RCBS 90284 Trim Pro 3-Way Cutter up to the hornady trimmer or is there anthoe 3way out there. mainly for 308 and-06. thanks
well after a few thousand rounds the lip of my extractor broke off leaving a fired casing in the camber. no biggy just pushed it out. my question is, is there a upgradeable part such as a hardend/stronger one you guys know of. my rifle is a dpms. thanks
http://www.midwayusa.com/product/538957/lyman-turbo-600-1200-case-tumbler-auto-flo-conversion-kit
i would like to mount this on my extra fa tumbler. does anyone know if this will mount up. im guessing probably not but it might be worth a shot. or ill cut a hole in my bowl now and make a plug
i have looked on many sites but i have yet to see if anyone has compared their rifle with and without the wedge. many say it does nothing, some like the tight feeling. but i havent seen any hard evidence that it doesnt do anything or it does. i never paid attention to these till my neighbor...
my buddy back in fl wants me to start reloading some rounds for him. the gun is used for hogs and the occasional deer. i have his once fired brass. so im just going to neck size them. does anyone on here have a good starting point with that round in that gun. i.e. powder/ primer/bullet/ col to...
after reading through numerous posts i didnt really see the answer i was looking for. i got a lee handheld now. i could prime on the press but i like watchinf tv and doing it. my proble is im a 90% disabled vet mainly for my wrists and hands. bad surgies and such. so my hand strength is way...
i switched the springs (3 each) out in my dpms 308 sportical with the jp enterprises yellow sping kit. took about 10 min with a cleaning also while the trigger was out. i used the electronic pull gauge at work which we just got back from pmel. i work at an air force base on the ejection systems...
is there a way to sharpen the attachments? seems like the deburr/primer cleaner and chamfering tools are getting dull. i have ran thousands of brass over them. can you sharpen them or just get new ones? thanks
http://combatoptical.com/catalog/AR15-M4-6.5-INCH-QUAD-RAIL-STYLE-HAND-GUARD-Free-12pcs-plastic-rail-cover-701.html
i know its not a free float which i want. but i just found a gg&G heavy duty bipod out at my shooting spot in the desert. i just looked it up and its like 2 bills. but i might...
im using hornady dies. cleaned and lightly dry lubed. while trying to seat my projectiles to 1.250. some are on the dot but the next will be 1.31 then 1.089 and it varies. i load my othe calibers and never had this problem. i using mixed headstamps, all cases tumbled and expanded. i checked the...
does anyone have the load data for 38 special and 357 mag using speer (4203) 140 gr hp with bullseye?
just the min and max im thinking 3.5 min and 4.3 for the max for the 38 and min 5.7 and 8.0 max for the mag. is that correct
im in the process of decapping/resizing about 1500. of these 1500 about 280 of them are once fired by me federal's. the were the 150 grain softies. the rest are rem's and L/c. problem is the dies's lee and hornady dont want to start going in on almost 3/4 of them the other 1/4 i can get about...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.