This is the first time I have had this problem loading 45's. I have reloaded well over 10,000 rounds and this is the first time I have had a problem with cases collapsing while seating the bullet. I am loading some XTP's into nickel cases and they are collapsing badly. The first one I thought...
I am getting ready to load up some 308 150gr Barnes TTSX and the load data in all my references that I find calls out an OAL of 2.80 - 2.81. I decided to pull out some Barnes factory ammo 150gr TTSX and measure it. the factory ammo is 2.70 2.71 and crimped. Any feedback would be appreciated...
Wanted to get some feedback on which powder is preferred for a .308, IMR4064 or Varget? Which is more consistent with extreme temperature swings? Will be used with 150 & 168gr
Thanks
I was a a bit surprised when I compared load data between my 49th ed Lyman reloading manual and my 2nd ed Lee Modern Reloading manual for S&W460 load data.
Lyman: Barnes XPB 250 gr., H110 powder
Starting : 36.5gn Max: 38.5gn
1985 fps 2123 fps
Lee: Barnes...
I am looking at the Foster Case Trimmer but keep looking back at the Wilson. Is it worth the money to buy the Wilson?
Is there different Trimmer I should consider and why?
I wil be using this initially only for S&W 460 mag cases.
I am interested in hearing from other reloaders of S&W 460XVR what they feel is the best bullet and load for deer and what they feel is the best Elk load.
I am having problems with the edge of the brass (mouth) getting crushed from time to time at the powder drop and expander location. It is not over flaring the case mouth but will crush a small portion of the edge. This doesn't happen every time but maybe 1 in 10. I checked for burrs and found...
I am in the process of loading some 38 spcl's and am having a major issue with the OAL being all over the place.
I am using a Redding Comp Pro series die set with the Micrometer Seating die.
I am trying to load 158 gr Plated (X-TREME) SWC with an OAL of 1.455".
I set the Seating die for...
I just got 1000 38 spcl 158gr SWC (plated) and am interested in feedback from anybody that has reloaded and shot these in the past. I am looking to use 231 and am interested in what loads you found to work well. Talked to X-TREME about reloading data and was told to use speer jacketed data...
I am looking to pick up a revolver to shoot PCCA with and I think I have narrowed it down to the S&W 640 or the Ruger SP101 (2-1/4"). The Sp I handled the other day had a bit of an owkward cylinder release and that concerned me for reload speed.
Any feedback would be greatly appreciated...
I tested some reloads today and it looked like I had some unfired powder (slight green granuals). The load was taken from the Hornady which lists the follows:
I used 3.1 gr's, 148 gr. DEWC
Hornady Data:
148 gr. HBWC, BBWC & DEWC - COL 1.180", W231: 2.2 - 3.5
Hodgdon Data:
148 gr...
Anyone know of issues using the LNL Case Feeder with brass that has been hand primed? I don't trust the auto-prime on the LNL so I hand prime and inspect all my brass prior to reloading on the LNL.
I am shooting IDPA, CDP class using my DW Heritage 1911. My problem is I have large hands and have a hard time aquiring a prper grip duing the draw. Any suggestions on who makes a great quality competition grip that is thicker then the standard 1911 grip?
Thanks
Ferg
I am a little nervous when I compare the Hodgdon's data to Hornady's with regards to 38 special 148gr DEWC.
WIN 231
Hornady: 2.2(min) - 3.5(max), COL - 1.180
Hodgdon: 3.5(min) - 4.0(max), COL - 1.160
I know many will say use the load data from the powder mfg. but does anyone have any...
Set up to load 45 ACP 200gr LSWC, OAL 1.25 using WST. Digital scale warmed up for about 30 min. Calibrated it and proceeded to adjust LNL powder measure to drop 4.6 gn's. Everything seemed fine and started loading. Checked the load after 50 rounds and the scale was acting strange. pulled out the...
Just bought a S&W 642, 38 special and plan on reloading for it.
1) Looking for suggestions on what is the best load for the wife to use that won't bother her while getting use to it?
2) Recommended bullets and manufacture?
3) W231, WST & Tightgroup load data that you feel are great...
I have the Redding Comp Pro Series Die set for the 45 ACP and love them. Just bought a S&W 642, 38 Special and want to order some dies. Redding lists the pro set for the 38/357 but shows a ( - ) for the 38 special. Should I order the 38/357? It seems that the 38spec/357 is available in the pro...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.