Want to start annealing brass
I have been reloading for a long time, but I have never annealed my brass. I have a decent amount of fired brass for 223, 30-30, 270 Win, and 7.7x58 Japanese. The 223 brass has been loaded and reloaded several times. I want to start annealing to get more...
Can a rifle be custom made in any caliber/cartridge even if that cartridge has no SAAMI specs?
I want to get a custom made bolt action rifle in 7.7x58 Japanese Arisaka. I don't want to use a rifled action taken from one of the milsurp rifles, I want a completely newly made, custom made rifle...
https://www.sigsauer.com/store/whiskey5-1-5x24-mm.html
I'm considering this optic for a 10.5 inch barrel 5.56 AR pistol build. I am looking for advice from anyone who has used these optics. I am particularly wondering if the red dot is bright enough to be seen easily. I am used to using...
I have used H-335 for 223 reloading with good success in terms of results when the rounds are fired. It does meter very nicely in my Dillon XL650 and it seems like a good powder to work with. I can use it for the other rifle calibers I load for; 30-30 and 7.7x58 Japanese Arisaka. However...
UPDATED in post #36, second page.
Failure to extract with 9 mm Titegroup: not enough powder, or too much?
I just started making 9 mm rounds with Titegroup and had several rounds each mag that the fired round stayed in the chamber, did not extract, and thus jammed up the firing string. Easily...
I want to pull the bullets from some loaded ammo and then use the primed brass to load other powder and other bullets. I will be using the grip-n-pull tool with each round mounted in a case holder in a single stage RCBS press for the pull process. Do I need to re-size the necks before loading...
I have been loading for about 10 years, 9 mm, 357/38, and 223 using Dillon XL650 and Dillon dies. I want to start loading for the 7.7x58 Japanese (Arisaka) rifle cartridge and Dillon does not make dies for that cartridge, so I've looked around to see what I can buy. RCBS, Lee, Hornady, and...
I am in the market for one or two complete AR uppers, for home defense AR's. DS Arms, Inc has some on sale for reasonable prices, $250-350. Are they a good-to-go company, or should I look elsewhere?
I want either 14.5 inch barrel with welded flash-hider or 16 inch barrel with mid-length gas...
I have a Dillon XL650 and I generally like it a lot. I want to get a second press, that will be left set up for 9 mm loading (rarely, if ever will do a caliber change out). I currently use my XL650 to load 223, 9 mm, 357 Mag and 38 Special on it. Caliber change is not too bad in terms of time...
I sighted in my AR rifle at 50 yards with Aimpoint PRO and Burris 3x magnifier from seated position at bench. Target was essentially in-line with the rifle bore, or just slightly lower (~4 inches?). Shot groups were fine, small and compact, reproducible mag after mag. Then, when I went prone...
I am experienced with pistol reloading, but new to 223 reloading on Dillon XL 650 press. Will be using Win 748, once-fired and range pick up brass, 55 gr BT bullets from Bulletheads, CCI small rifle primers. I have Dillon XL 650, two tool heads, Dillon carbide 3-die 223 rifle die set, RT1200B...
I am getting ready to load 223/5.56 ammo for the first time. Have been doing a lot of reading, watched a bunch of YouTube videos. I have the dies, the primers, the once-fired brass, the bullets, the powder. I've got the Dillon super-swager thingie to get the military crimp out of the primer...
I was thinking about getting one of the FNH AR's that they are now selling, FN-15. I think that FNH is making the M4's for the U.S. military now, is that correct? Anyway, does anyone have any experience or first hand info about their AR's? thanks
Have a P229R that I use with a Crimson Trace laser grip and TLR-1 for home security. Am interested in mounting a micro reflex sight to the top of the slide, does not have to be Trijicon brand, can be something else like that. Does anyone know if this is possible or a gunsmith who can do that work?
I apologize if this "should have been" posted to the rifle forum, but it does deal with semi-auto pistols, so I think I made the right decision to put it in the autoloader pistol forum. Sorry if I chose wrong.
Is it possible to remove/replace the buffer tube on a Sig PM400 AR PISTOL ?
I...
I have a Sig P290RS. It has been an excellent gun. I use it for conceal carry nearly every day. Very slim, lightweight, and easy to carry. Shoots very smoothly for something so small. Very accurate gun; very easy to shoot accurately.
So, here's my question: I shoot at the range often...
I'm confused about some terminology (and the implications of that terminology for selecting load data):
Are "JHP" ("jacketed" hollow point) bullets for reloading "jacketed" or "plated" ???
I have a bunch of 9 mm FMJ from Montana Gold that are open (i.e., lead showing) at the bottom, and I am...
I am loading 9 mm on a Dillon XL650. I've been using Montana Gold 9 mm 115 grain bullets, but they are out of stock. Can I use 357 Sig 125 Grain HP's to load 9 mm? They both are .355 diameter. I'd use the data I have for 124 grain 9 mm HP's to calculate the powder load and the COL. Just...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.