Search results for query: *

I was able to get some 40 bullets. I see Alliant max load is 9gr of PP with 155gr Gold Dot, Nosler data is not supporting PP, and Lyman book shows 8gr max load. 1gr is quite a bit of difference for auto pistol. What are ya'll running? I also have Unique to use.

Well I bought a 3BR some time ago and finally got a chance to use it. I have been using RCBS Chargemaster for several years and was content except for the speed. I wanted to make some .223 z-max with Benchmark and the powder drops have been phenomenal. I am getting consistent 25.4gr drops. It is...

W231 is a little slower than Clays and Power Pistol is about as fast as WSF powder, so why aren't they listed in load data for shotguns? I love these powders for pistol. What powders do you use for target loads in 12ga and 7/8 - 1 1/8oz loads?

Has anyone gotten the velocity numbers Nosler data and R22. I have tried the loads Nosler has in their 4 and 6 books and not gotten the velocities as with other data. I have tried a few different lots of R22 in 7mm Rem Mag and 270 WSM and I am down 100-200fps. But with IMR 4350 and their load...

Has anyone made a stout load for 220gr 8x57? Yes, I know I am asking for above max. recommended loads. I am working on a load for 220gr Sierra Game King which have a pretty decent BC, but the Sierra accuracy load is about 2000fps(39-40gr Varget), not quite what I am looking for in a long...

I bought some Ruger replacement wood grips and put them on and they are too short, my hand falls off the bottom of the grip. I had Pachmyr grips on there originally and they were too thin for a good grip. This is mainly a plinker/hunting backup revolver. I really like the S&W 29 and 19-5...

36gr Remington Golden bullet is what we are using. I think it is 1280fps rated. Marlin 60 is the rifle. Any recommendations?

http://www.ktvz.com/news/23772491/detail.html

Anyone load for BAR in 7mm Mag or other magnum BAR? I made some 162gr Interlock loads consisting of the following. Winchester F/L sized in Lee dies, CCI 250 primer, R22 powder. The Interlock bullets had lead tips that were pretty bad. Groups were fist sized at 100 yards. The 1st and 2nd...

Would like some nice mounts for a FN-built mdl 70 Super Grade. Prefer a Weaver-style 2-piece mount. What do ya'll use?

I starting to work on these loads now. Mostly looking at R19 and R22 loads... Norma has 61.7 of 204 for 3288fps as MAX. 204 is between R19 and R22 in speed(brisance???). Alliant has 66gr of R22 at 3228fps, and 66gr R19 for 3088fps MAX. Win brass and CCI 200 primer Nosler says 65gr of R22...

Hornady site didn't cover this caliber. Anyone have any data? I have W231, Power Pistol and H110. Much Thanks! This if for the FTX bullets.

My dad made these. 30-06 with factory Winchester 150gr put a hole in left target at 100 yards, but at 200 it was just a divet. My 7mm Mag with 120gr Nosler Ballistic tips, AK-47 with FMJ, and my .223 with 55gr Nosler Ballistic Tips just made divets in the steel at 100 and 200 yards.

What's the difference?

Can I use these for general hunting at 30-06 speeds, 2800-3000fps?

All loads are listed as max. I have IMR 3031, R19 and Varget available. I prefer to use the IMR 3031 to get rid of it. Is it too fast to have a good accuracy plateau? I have load data to 2932fps. I would like to hit 2875-2900fps with 1.5 MOA or better accuracy. This is to match factory...

My dad is looking at 270 WSM Winchester mdl 70 for deer season this fall. He gave me the 7mm Mag, so he has been jumping back and forth between a .22-250 and a 30-30. He really likes the trajectory of the 270 WSM 130gr at 3300fps. Truely, he wants the trajectory of a 22-250, but a bigger...

A friend of mine has a Rem. 710 30-06 with quite a bit of surface rust. I wiped it down with CLP and oiled the bolt with 3:1 oil. But the blueing is pretty much lightly rust orange. Is there a more agressive rust removal. I notice some use brass scrub with WD-40 or Kroil. What do you prefer...

I want to shoot my AR off the bench with a rear bag. What model do you suggest? I am looking at the BR models, but they have one with swivel (S model), one without. Also, do I want the notched legs?

My buddy has one. He said the magazine holds 2. Does anyone have a larger magazine?