Search results for query: *

Hello all, I have a Ruger MK III and I would like to know what is the tolerances/dementions of what the chamber should be, and what would be the easy way to check this? The reason I ask, is that I get a lot of split cases, some to the extreme that go all the way down to the rim, but most do...

Hello all, Looking at changing the barrel on my AR-10 (7.62x51mm/.308WIN) as I'm mostly going to shoot it from the bench, so I have accuracy on my mind for longer ranges. I'm thinking a 22" or 24" heavy barrel but can't decide, so any thoughts on that? Also what company has a reputation for...

Hello again, I bought these bullets at a local gun show from an old guy selling off some of his reloading supplies. The yellow plastic box with Speer colors of Gray, black & yellow label on it says; "10mm 180GR .400 plated hollow point bullets" Are these really plated or are they jacketed? As I...

Hello all, I have some 180gr. Remington Bronze Point bullets, and want to know if there is an accurate load (long range target shooting) for them in my AR-10/.308-7.62x51? I have no spicific data for that paticular bullet in any manual I have, so was hopeful someone here has used them with good...

Hello all, Everyone know how hard some powders are to find right now, so if you are like me, your trying different powders that are lucky enough to find something. Anyway I come across some Winchester AutoComp, but not much data in any of my books or pamplets. Looking on line, was some help and...

Hello all, As everyone has noticed, powder has been scarce, at least certain kinds anyway. I'm gathering what ever powder I can find for my 7.62x51mm or .308win, as long as there is data available, so anyone use RamShot TAC in that caliber? If so how do you like/dislike it, as compared to your...

Hello all, this is my go to forum for answers. Everyone I'm sure has their favorite powders for what they like to shoot, and if you are like me, you have experenced some difficulties in getting certain powders. For the most part of the last year and a half, I've been using WIN 231 powder for...

Hello all, I picked up a coffee can of some loose .308 cal ammunition from a LGS, He said that they came from Germany and had been removed from links used for a machine gun. I bought them at a good price, but want to know if anyone has any experance with them and are they any good? The head...

Hello to all, I'm a first time owner of an AR type rifle, a S&W A-10 ( .308/7.62x51mm cal. ) to be clear. I like the gun just don't like the trigger, IMO its just plain bad, lots of creep & take-up. So I'm looking at replacing it but want some input from you all. The few people I've talked to...

Hello all, I'm wanting a little help with getting some more exact load data so I can use one powder for my reloads on my Dillon 550B press. First, a little background and reason for doing so. In the past 4 years I've been using a RCBS rock-chucker for loading my .45 acp, 9mm luger, & .40 S&W...

Hello, & thanks for looking. First a little history, about 4 years ago I bought a used Steyr M40 pistol, and really liked it, but about a year or more later it broke. The trigger would not reset, so I had to send it in for repair. Steyr repaired the broken drop safety bar and I got it back in a...

Hello all, I was at a gun show yesterday and as of lately most dealers either have no .22 LR ammo or if they do it's $50 a brick or higher. I ran into a dealer I have known for several years, and he had a brick with a price of $40 on it. So I asked him what he would sell to me for, he said $30...

Have they changed some? The reason I ask, is that I bought some old cans AA#5 & AA#2 and when comparing them with some very new No. 5 & No. 2, they don't look quite the same. LM

Hello all, I was just wondering, because I just picked up a used Kahr P40 today, and while I have no real interest in the .357 caliber. You see other manufacturers ( Glock, Sig, S&W & others ) offering this cartridge in their line-up of firearms. Usually a pistol chambered in .40 S&W can be...

I'm have touble finding a load for .40 S&W using 180gr TC lead bullets, with Winchester 231 powder. Don't need any to limit loads, but don't want any wimpy load either. Just a nice middle of road target load. Any suggestions of what you have had good luck with? Thanks, LM.

UPDATE: Hello, Decided to post this seperate anyway rather than leave it attached to the Boberg XR9-S post. I went to the range today with my Boberg XR9-S & my Kahr PM9 as these pistols are very similar in size. The perpose was to do some tests with my cronograph. These will not be actual...

Hello all, I just got my new XR9-S from Boberg Arms. See link to web site--> www.bobergarms.com I can't wait to try it out this weekend, and was interested in getting some feed back from any other owners out there? Things like what ammo have you tried? Any problems with some types? Generally...

Hello all, I'm having a little trouble finding any data for the .45 acp using Berry's 185 gr. Hollow Base Round Nose bullets. So I'm asking if anyone has used these, and what powders have you tried? I would like to use Win. 231, but have other powders like; Unique, AA#5, and Bullseye, so any...

Hello all, I just got a good deal on some powder, an 8 lb keg of Winchester 231, and now I need some help with some load data. I know this is a versatile pistol powder, which is why I bought it in the first place, besides the price was right. Although, it's not in my powder bin, as I usually use...

Hello all, I posted this question in the reloading/handloading section of this forum, but haven't gotten any replies. Maybe it's just to new and no one has tried it yet, or maybe it will get more views here. Anyway here goes; at my LGS yesterday I saw some Federal made American Eagle 40 gr. FMJ...