rmr

A little background before my question: I recently picked up a new Smith M69 and discovered that the barrel is either clocked or crooked. I've been monkeying around with picking aftermarket front and rear sights because I cannot see the factory sights in dim lighting...and I remembered that I...

So the Lot 1 RMR MPR Nukes arrived today in 147 gr. (<<<<<------ Edited, this is incorrect , see below, sorry, innocent confused brain dead mistake.) Got a bag of Lot 3 Nukes in 124. 1000 ct of each at roughly 11 cents per, I've got plenty to work with. Going to put them through their paces...

I did some more testing with the best load from the previous load test. https://www.thehighroad.org/index.php?threads/9mm-wsf-and-rmr-124gr-mw-test.904576/ I used my version of the Ransom rest, after I did some mods to try to correct some issues I was seeing. Or I thought I was. 5.0 gr of WSF...

I'm looking for a relatively universal OAL for the RMR 115gr FMJ in 9mm. I only have a single barrel to plunk test against at the moment (Gen3 Glock) -- it will pass quite long. What is a good OAL for this bullet that would work with most 9mm pistols, including CZ and Gen5 Glock?

I'm new to reloading and would like any advice on load data for rmr's 124gr matchwinners. I have power pistol and cfe powders on hand. I'm just looking for accurate plinking rounds. Still working on my accuracy with factory loads and wanted to give reloading a try. Any advice or input would...

Good morning folks, Does anybody happen to know the nominal length for Hornady's 124 Gr. and 147 Gr. FMJ RN bullets? I can't seem to find it online anywhere. I'm just starting to work up loads for some RMR 124 and 147 Gr FMJ bullets (just opened the bags and measured some sample bullets this...

Looking at RMR sights perched on top of a handgun slide... Every time I wonder: these things were designed for rifles, and it shows. Why don't they make smaller models to fit on handguns? They are definitely way better than any iron sight, but so bulky and plain boar-ass ugly on a handgun...

It's been a while since I posted anything, about 2 months ago I pulled the trigger so to speak on my first Glock, a G19, and before I even shot it once, I bought an aftermarket slide with a RMR cutout, so I can install small micro dot. Specifically I'd been intrigues by the NCStar VISM Flip-Up...

For those that don't know, Rocky Mountain Reloading has released new in-house 115 and 124 grain JHP 9mm bullets. The price is very attractive, and since I have always been happy with everything else I've gotten from RMR, I decided to try out these new bullets. I went with the 115 for 9mm Luger...

I’ve finally decided to take the plunge on adding an RMR to my EDC Glock 19. I picked up a 3.25 MOA Trijicon RMR on sale at Cabela’s, and now I’m looking at options for slide milling. There’s quite a few names out there — Battlewerx, Suarez, L&M, ATEI, etc. Prices similarly range widely, and I’m...

Good afternoon everyone- I once again need your expert advise/opinions Here's my quandary: Old style 9MM .355 RMR 124 JHP Bullet length: .579 OAL 1.090 New 9mm .355 RMR In House 124 JHP Bullet length: .558 OAL ?????? Let me first say I will load both 1.090 and 1.069 to run across the chrono...

im wondering what you think and how well they feed. .45 185 Grain Rocky Mountain ThunderCast SWC https://rmrbullets.com/shop/bullets-for-reloading/bullets-for-reloading-45-452-14/45-185-grain-rocky-mountain-thundercast-swc/?v=3f60f4207da5 Thanks. And happy new year

There is only one review on the site and he claims that these feed better than other flat point bullets in his 1911's because the edges are more rounded

Hey everyone, With the release of red-dot-ready polymer pistols from the big manufacturers, Ive been seeing a lot more of them on the range. I have had the chance to shoot some very nice "worked on" competition Glocks with RMRs installed. I just dont understand why so many people want...