titegroup

  1. C

    148gr HBWC Powder Choice

    I just found some 148gr HBWC (Hornady) and thought I would try them out. I know that the stand by is 2.8-3.0gr of Bullseye but I have a lot of Titegroup on hand and thought I would give that a try. I looked it up on Hodgdon's website. There they list the starting load at 2.7gr and list it to...
  2. B

    Reloaded 9mm Velocity Way Too High

    I'm fairly new to reloading and inherited a nice lot of gear and supplies, including a Dillon 550 press. I reloaded some 40 S&W without issue and decided to get setup on 9mm. After reloading maybe 50 rounds to take out and test I got some bizarre velocities. I'm using a Caldwell Chrono to...
  3. S

    Minimum COL for 115 grain plated round nose 9mm?

    Hi Guys, I have loaded thousands of plated 115 grain plated round nose Berry and Ranier for 9mm with .37 CC Lee autodisk that produces charges 4.0 to 4.4 grains of Tite Group and they all shot well from 3 different Kahrs, XD, Sig, Ruger, everything I own. My press is set up to seat the bullets...
Back
Top