Outdoornut
Member
- Joined
- Dec 6, 2010
- Messages
- 6
Hello,
I have a sporterized Remington 1903A3. I disassembled the bolt for cleaning (have done this before w/no problems), when I reassembled the bolt was almost impossible to cock. I had to pull the the firing pin back in order to cock the bolt. With it engaged it worked fine. Thought it may be a bad spring so that was replaced. Same problem, any suggestions? It seems there is too much tension on the spring.
Thanks,
Dale
I have a sporterized Remington 1903A3. I disassembled the bolt for cleaning (have done this before w/no problems), when I reassembled the bolt was almost impossible to cock. I had to pull the the firing pin back in order to cock the bolt. With it engaged it worked fine. Thought it may be a bad spring so that was replaced. Same problem, any suggestions? It seems there is too much tension on the spring.
Thanks,
Dale