Red_Dog_Leader
Member
- Joined
- Mar 25, 2007
- Messages
- 77
I’m loading for a bolt action,
Sierra 55G SPITZER BLITZ #1345 + H335+Wolf SR (all I could scrounge up)
Going too:
• Lube, DePrime/Size cases
• Clean primer hole
• Tumble the brass
• Make sure all of the cases are of uniform length and under the case maximum length.
• Prime the cases…..
This is where I’m foggy. In the ABC’s of reloading, he shows running the brass up and into the Deprime/sizer to seat the primer a second time.
Is this OK to do a second time, or should I run it up, but not into the die, put primer in arm, prime the brass, then hand rotate on to seater die.
TIA, T
Sierra 55G SPITZER BLITZ #1345 + H335+Wolf SR (all I could scrounge up)
Going too:
• Lube, DePrime/Size cases
• Clean primer hole
• Tumble the brass
• Make sure all of the cases are of uniform length and under the case maximum length.
• Prime the cases…..
This is where I’m foggy. In the ABC’s of reloading, he shows running the brass up and into the Deprime/sizer to seat the primer a second time.
Is this OK to do a second time, or should I run it up, but not into the die, put primer in arm, prime the brass, then hand rotate on to seater die.
TIA, T