WelshShooter
Member
- Joined
- Jun 10, 2014
- Messages
- 491
I'll chime in with Lapua brass too. I've used UK milsurp brass (Radway Green) but find that it's too much effort to bother with. Sa far I am on 5 reloads out of my Lapua brass and I haven't even needed to trim them. I always full length size, but only enough to push the shoulders back 0.002" (setting the FL die up per instructions will push the shoulders much farther than two thou). Primers fit nice and tight in the primer pocket.
If you can get free range brass try that out first! Make sure you segregate by headstamp because wall thickness varies between manufacturers, and even more so between commercial and milsurp brass.
This is being shot out of my CZ 527.
If you can get free range brass try that out first! Make sure you segregate by headstamp because wall thickness varies between manufacturers, and even more so between commercial and milsurp brass.
This is being shot out of my CZ 527.