What are your favorite loads for .32 cal shooting. Whether it is .32 auto, 32 s&w, 32 S&W long, 32 mag, or 327 and what it used for? I use lymans 4.0 gr unique/100 gr. LRNFP for 1000 fps in 32 S&W long. This is fired in solid frame guns. Used for jackrabbits, plinking, target work. Bit much for small game like cottontails. Sub inch @ 25 yds. Use a lee .313 rb or hornady .310 RB over 1 gr. unique in 32 S&W or 1.5 gr in S&W long to bust rats at the cabin or plinking. Very cheap to shoot, no noise. Lyman 313445 a 95 gr. WC in 32 long or 32 mag. for small game and plinking/target. For the long: loads are 1.7 gr. red dot for 500fps or 3.0 gr. for 800 fps/ is a good snowshoe load. In the 32 mag: loads are 2.8 gr. titegroup about 950fps or 3.4 gr. and 3.4 gr. unique at 1120 fps. For the 32 auto lyman's 77 gr 311252 over 3.0 unique gives 1050 fps in a 5.5" revolver. THESE LOADS SHOOT GOOD IN MY GUNS AND SHOULD BE APPROACHED USING GOOD HANDLOADING PROCEDURES. THE RB LOADS ARE AT THE LOW END NOW. START THERE AND WORK UP. Have fun and bangaway.