Yesterday I became the proud new owner of a slightly used .500 S&W Magnum. I've been dreaming about owning one of these for quite some time, and yesterday was the day. I picked it up for what I think was a fair price. In addition to the gun it came with 60 rounds of factory ammo (20 round lots from 3 different manufactures)
Well today I had a few work related issues to deal with, but I was able to sneak out in the afternoon for an impromptu shooting session to test my new toy! I decided to shoot my .44 Magnum to work my way up to the .500. After throwing a few cylinders of some hot .44 hand loads down range, I decided it was time to unleash the mighty 500.
Having never fired a .500 before, and watching a few videos of people accidentally touching off 2 rounds from instinctively gripping the trigger during recoil, I decided it would be wise to only load 1 round at a time. I touched off my first round and was surprised at how much of a blast came from the gun, but also relieved that the recoil wasn't unmanageable for me.
Next I decided to try one each of the 2 other boxes of ammo I had with me to compare the recoil. Although I would doubt my accuracy would win any competitions, I was begging to settle into my new toy and enjoy it. After firing the 3 rounds, I decided to try a full cylinder from one of the ammo manufactures. Rounds one and two went off just fine. When I went to fire shot 3, I heard a click but no BANG! After waiting a few seconds for a hang fire, I went to open the cylinder to but to my surprise it was jammed.
At this point I was thinking that the stupid S&W lock had turned itself on from excessive recoil. After packing up my stuff, and swearing at S&W and their stupid locks, I went home with three live rounds still in the cylinder.
Once I got home I inserted the stupid lock key to see if it had indeed locked itself. Unfortunately it hadn't. Next I took a flashlight to look at the cylinder gap and could see a sliver of copper shining back at me. It was a squib. After grabbing a hammer and cleaning rod I pushed the bullet back into the case, thus freeing up the cylinder to move.
It appears that the primer did ignite and pushed the bullet just enough to engage the rifling but not enough to travel down the barrel significantly. The powder appears to be partially burnt as well. I can only imagine the outcome had the bullet traveled down the barrel, became stuck, and then I fired another round of full house .500 S&W Magnum!
Moral of the story? Always, Always, Always check the gun after a misfire!
Now the big question, what to do with this batch of factory ammo? Contact the company to see if they will make it right?
Well today I had a few work related issues to deal with, but I was able to sneak out in the afternoon for an impromptu shooting session to test my new toy! I decided to shoot my .44 Magnum to work my way up to the .500. After throwing a few cylinders of some hot .44 hand loads down range, I decided it was time to unleash the mighty 500.
Having never fired a .500 before, and watching a few videos of people accidentally touching off 2 rounds from instinctively gripping the trigger during recoil, I decided it would be wise to only load 1 round at a time. I touched off my first round and was surprised at how much of a blast came from the gun, but also relieved that the recoil wasn't unmanageable for me.
Next I decided to try one each of the 2 other boxes of ammo I had with me to compare the recoil. Although I would doubt my accuracy would win any competitions, I was begging to settle into my new toy and enjoy it. After firing the 3 rounds, I decided to try a full cylinder from one of the ammo manufactures. Rounds one and two went off just fine. When I went to fire shot 3, I heard a click but no BANG! After waiting a few seconds for a hang fire, I went to open the cylinder to but to my surprise it was jammed.
At this point I was thinking that the stupid S&W lock had turned itself on from excessive recoil. After packing up my stuff, and swearing at S&W and their stupid locks, I went home with three live rounds still in the cylinder.
Once I got home I inserted the stupid lock key to see if it had indeed locked itself. Unfortunately it hadn't. Next I took a flashlight to look at the cylinder gap and could see a sliver of copper shining back at me. It was a squib. After grabbing a hammer and cleaning rod I pushed the bullet back into the case, thus freeing up the cylinder to move.
It appears that the primer did ignite and pushed the bullet just enough to engage the rifling but not enough to travel down the barrel significantly. The powder appears to be partially burnt as well. I can only imagine the outcome had the bullet traveled down the barrel, became stuck, and then I fired another round of full house .500 S&W Magnum!
Moral of the story? Always, Always, Always check the gun after a misfire!
Now the big question, what to do with this batch of factory ammo? Contact the company to see if they will make it right?