wanderinwalker
Member
In my thread asking for feedback on the Colt Delta Elite, forum member bannockburn asked me to do some photos and a range review of my pair of Colt Competition Models. It's taken me a little longer than I though it might, but I'm happy to oblige!
First up, the stainless Colt Competition in .38 Super. I've had this one since just before Christmas and put about 1500 rounds through it to date. It has the Series 80 firing system that Colt has been using since about the time I was born.
If you're like most living, breathing humans, you've probably experienced the "love at first sight" sensation at least once in your life. This was definitely one of those occasions for me. As soon as I saw this one in the display case I HAD TO HAVE IT! And I must say, it hasn't disappointed me yet.
Running the Super at the range is a lot of fun. It's very soft shooting while still taking advantage of the real estate available in the 1911 grip frame. (My only knock against the plethora of 9mm 1911s now available. You're running a 250-cc revver where you can fit a full 650-thumper.) The 100-yard "rifle gong" is fair game any day. Put the front sight halfway up the plate, press trigger, *clack*, repeat until slide lock. Your perspective of "handgun range" changes a little with this pistol.
The only real issues I've had with the pistol stemmed from trying to reload the Fiocchi brass I accumulated from the break-in ammo. It was horribly inconsistent and gave me headaches trying to get a properly sized, seated and de-flared round to chamber. But after sucking it up and springing for a batch of virgin Starline cases, that issue went away. I can also say my pistol won't feed SIG V-Crown hollow-points with any consistency. Stick to RN, FMJ or even Hornady HAPs and it will chug along without a hiccup.
And somehow, I manage to find myself with no sample targets to post like I will for the .45 below. Rest assured they generally show similar accuracy potential, limited purely by the trigger nut.
Next up is my second 1911, a blued Colt Competition Model, this one in .45 ACP. I've always wanted a "Colt 45", since even before I fell into the gun geek rabbit hole. There's just something about the classic old American big bore pistol. It's an itch I tried to avoid scratching for a very long time. I told myself the logical choice is a modern polymer 9mm service pistol with a magazine that holds more bullets than I can fit in the palm of my hand. The 9mm is cheaper to run. It's lighter. The modern guns require less maintenance. Blah blah blah, ad nauseam.
Finally, after all of that, here it is. Note: I changed out the stock black and blue grips with Colt logo for a set of VZ Double-Diamonds in Green Lantern. I liked the way they added a little extra contrast to the pistol.
Right off the bat, this particular pistol uses the Series 70 firing mechanism. (And I'm just enough of a geek to know that "Series 70" originally didn't mean the lack of the plunger safety, but I digress.) Out of the box, the .45 has an advantage in the trigger department. Neither is a hindrance to good shooting though, and since they are both smooth and crisp I won't be having them adjusted any time soon either.
I've only put a couple of hundred rounds through the .45 so far, and all but 8 rounds have been Federal Champion 230gr hardball ammo. This pistol is surprisingly mild-mannered. I don't know if my memory of .45 recoil was embellished, if the dual-recoil spring assembly does work as advertised, or if maybe the frame enhancements of undercut trigger guard and high grip safety are truly superior to the traditional frame contours. But what I do know is I really like shooting this pistol as well! And so far it's been 100% through break-in with the FMJ. I plan to run some more hollow-points through it before considering it good-to-go, though it doesn't look like I'll run into too many road blocks.
A couple of quick targets:
25 yards
50 feet
If you've made it through all of that with me, let me offer this final section of impressions.
1) If you're thinking about getting a Colt 1911: All of the ones I've examined in person have ranged from good to very good. Keep in mind these are production guns and not hand-fitted customs, so there is going to be some variation. And keep in mind, some issues, such as poor accuracy, won't be apparent until you put rounds downrange, which isn't limited to only Colts.
2) Both of my pistols are fit very well in the barrel hood and slide to frame fit. There's no wiggle or play at lock-up.
3) Colt's grip safeties rattle.
4) When you offer somebody at the range a Colt and a loaded magazine, even if they are already shooting a 1911, odds are good they'll take you up on the offer. Double or nothing when you mention it's not a .45.
5) I personally really like the fiber optic front sight/plain black rear sight combo. It helps put my focus on the front sight, where it belongs, and gives a less-cluttered sight picture for my brain to process. The result is faster, more sure sight alignment.
6) 1911s are addictive! Now that I have 2 in hand, I'm back to thinking I really need a Delta Elite at some point in the future.
First up, the stainless Colt Competition in .38 Super. I've had this one since just before Christmas and put about 1500 rounds through it to date. It has the Series 80 firing system that Colt has been using since about the time I was born.
If you're like most living, breathing humans, you've probably experienced the "love at first sight" sensation at least once in your life. This was definitely one of those occasions for me. As soon as I saw this one in the display case I HAD TO HAVE IT! And I must say, it hasn't disappointed me yet.
Running the Super at the range is a lot of fun. It's very soft shooting while still taking advantage of the real estate available in the 1911 grip frame. (My only knock against the plethora of 9mm 1911s now available. You're running a 250-cc revver where you can fit a full 650-thumper.) The 100-yard "rifle gong" is fair game any day. Put the front sight halfway up the plate, press trigger, *clack*, repeat until slide lock. Your perspective of "handgun range" changes a little with this pistol.
The only real issues I've had with the pistol stemmed from trying to reload the Fiocchi brass I accumulated from the break-in ammo. It was horribly inconsistent and gave me headaches trying to get a properly sized, seated and de-flared round to chamber. But after sucking it up and springing for a batch of virgin Starline cases, that issue went away. I can also say my pistol won't feed SIG V-Crown hollow-points with any consistency. Stick to RN, FMJ or even Hornady HAPs and it will chug along without a hiccup.
And somehow, I manage to find myself with no sample targets to post like I will for the .45 below. Rest assured they generally show similar accuracy potential, limited purely by the trigger nut.
Next up is my second 1911, a blued Colt Competition Model, this one in .45 ACP. I've always wanted a "Colt 45", since even before I fell into the gun geek rabbit hole. There's just something about the classic old American big bore pistol. It's an itch I tried to avoid scratching for a very long time. I told myself the logical choice is a modern polymer 9mm service pistol with a magazine that holds more bullets than I can fit in the palm of my hand. The 9mm is cheaper to run. It's lighter. The modern guns require less maintenance. Blah blah blah, ad nauseam.
Finally, after all of that, here it is. Note: I changed out the stock black and blue grips with Colt logo for a set of VZ Double-Diamonds in Green Lantern. I liked the way they added a little extra contrast to the pistol.
Right off the bat, this particular pistol uses the Series 70 firing mechanism. (And I'm just enough of a geek to know that "Series 70" originally didn't mean the lack of the plunger safety, but I digress.) Out of the box, the .45 has an advantage in the trigger department. Neither is a hindrance to good shooting though, and since they are both smooth and crisp I won't be having them adjusted any time soon either.
I've only put a couple of hundred rounds through the .45 so far, and all but 8 rounds have been Federal Champion 230gr hardball ammo. This pistol is surprisingly mild-mannered. I don't know if my memory of .45 recoil was embellished, if the dual-recoil spring assembly does work as advertised, or if maybe the frame enhancements of undercut trigger guard and high grip safety are truly superior to the traditional frame contours. But what I do know is I really like shooting this pistol as well! And so far it's been 100% through break-in with the FMJ. I plan to run some more hollow-points through it before considering it good-to-go, though it doesn't look like I'll run into too many road blocks.
A couple of quick targets:
25 yards
50 feet
If you've made it through all of that with me, let me offer this final section of impressions.
1) If you're thinking about getting a Colt 1911: All of the ones I've examined in person have ranged from good to very good. Keep in mind these are production guns and not hand-fitted customs, so there is going to be some variation. And keep in mind, some issues, such as poor accuracy, won't be apparent until you put rounds downrange, which isn't limited to only Colts.
2) Both of my pistols are fit very well in the barrel hood and slide to frame fit. There's no wiggle or play at lock-up.
3) Colt's grip safeties rattle.
4) When you offer somebody at the range a Colt and a loaded magazine, even if they are already shooting a 1911, odds are good they'll take you up on the offer. Double or nothing when you mention it's not a .45.
5) I personally really like the fiber optic front sight/plain black rear sight combo. It helps put my focus on the front sight, where it belongs, and gives a less-cluttered sight picture for my brain to process. The result is faster, more sure sight alignment.
6) 1911s are addictive! Now that I have 2 in hand, I'm back to thinking I really need a Delta Elite at some point in the future.