Ankle holster for Kel-Tec P3-AT????
- Thread starter Jedi_7.62
- Start date
- Status
Fred Fuller
Moderator Emeritus
'Scuse me for getting personal, but if you can't make a hip- pocket holster work with a P3AT, you're wearing your pants way too tight... 8^)
lpl/nc
lpl/nc
MachIVshooter
Member
My solution to concealment in clothing where you really can't was to attach a belt clip to my P3 and carry it IWB, with the clip behind my belt buckle.
All I did was get a regular old belt clip and drill two holes through it. Then I drilled two very shallow holes in the polymer of the P3 and carefully tapped them, and attached it with two 3/16" long #1-72 TPI stainless screws. Has held up so far.
All I did was get a regular old belt clip and drill two holes through it. Then I drilled two very shallow holes in the polymer of the P3 and carefully tapped them, and attached it with two 3/16" long #1-72 TPI stainless screws. Has held up so far.
pokey074
Member
I really like my Fobus ankle holster for my P-3AT. Of course, that is above a boot and covered by uniform pants. Otherwise, the P-3AT absolutely disappears in a DeSantis Nemesis pocket holster.
denfoote
Member
I'm also interested in this.
I went to the Uncle Mike's web site and found nothing using their holster wizzard. However, I found, by chance, an IWB holster for my AT at Sportsman's Warehouse. The important information here is the size. Size 10 fits the AT. With this, I went back to the offending web site (it is soooooo lame) and found a size 10 ankle holster for right around $40!!! Pricy, even for Michael's of Oregon!! They have listed two model numbers for left or right hand holsters. The left is #88102, the right, #88101. Wholesale Hunter has them for $32, but by the time you have it shipped, it probably will be within a couple of bucks of the list price anyway!! :banghead:
http://www.wholesalehunter.com/product/um/UncleMikesHolsters.htm
I went to the Uncle Mike's web site and found nothing using their holster wizzard. However, I found, by chance, an IWB holster for my AT at Sportsman's Warehouse. The important information here is the size. Size 10 fits the AT. With this, I went back to the offending web site (it is soooooo lame) and found a size 10 ankle holster for right around $40!!! Pricy, even for Michael's of Oregon!! They have listed two model numbers for left or right hand holsters. The left is #88102, the right, #88101. Wholesale Hunter has them for $32, but by the time you have it shipped, it probably will be within a couple of bucks of the list price anyway!! :banghead:
http://www.wholesalehunter.com/product/um/UncleMikesHolsters.htm
HogRider
Member
Galco COP Ankle Band Holster
http://www.copsplus.com/prodnum1880.php
I have tried multiple ones but liked this one the best. It's not cheap but it's excellent quality. Made in good ol' US of A, Phoenix. AZ.
I have carried a Guardian 380. a Bersa Thunder and now a P3 AT in the same holster and they all seem to fit in just perfectly.
http://www.copsplus.com/prodnum1880.php
I have tried multiple ones but liked this one the best. It's not cheap but it's excellent quality. Made in good ol' US of A, Phoenix. AZ.
I have carried a Guardian 380. a Bersa Thunder and now a P3 AT in the same holster and they all seem to fit in just perfectly.
Unless you've worn a ankle holster before, see if you can try one before buying one. They drive me NUTS! I regularly carry a P3AT in a DeSantis Nemesis pocket holster AND no one has ever "made me". That includes greeting a couple hundred people (church as a pastor) AND courthouse security (as an LEO). They DON"T show especially if you wear pleated pants. On the other hand, I've seen A LOT of ankle holsters print (do you have a tumor?) or be exposed when someone sat down or crossed their legs not thinking. Just my .02 but I think FRONT pocket carry is better. People are USED to seeing things in your pocket NOT on your leg.
HTH,
Mike
HTH,
Mike
- Status