AR vs AK. Finally. (Funny)
- Thread starter 8Balls
- Start date
- Status
I think the point is that you cannot work the action with the safety engaged, you most put it into battery first, then engage safety, and be careful how you release it.
One of the things I never liked about MNs
Keep 'em coming this is one of the funniest threads in a along time.
cosine
Member
Funny thread! 
(tagged so as to not lose track of it...)
(tagged so as to not lose track of it...)
Storage requirements
Caching:
AK: Wiped it down, wrap it in burlap and bury in back yard. Take out, hose it off and fire!
AR: Clean, iol, grease, coat with moisture sealant, plug barrel with RIG, enclose in hermitcally sealed bag, place in ABS pipe with lots of dissecant, seal pipe with lots of tape and wrap in tarp. Bury in backyard. Dig up every year for inspection and cleaning. Soak in solvent, clean, oil, grease, make sure you have all the parts, inspect all parts for damage, reassemble, test fire, make adjustments, clean, oil, grease, Ready to fire!
M-N: Throw in bottom of outhouse. Wait 50 years. Dig up. Bang on concrete to knock of large chucks of cr@p. Ready to shoot!
Caching:
AK: Wiped it down, wrap it in burlap and bury in back yard. Take out, hose it off and fire!
AR: Clean, iol, grease, coat with moisture sealant, plug barrel with RIG, enclose in hermitcally sealed bag, place in ABS pipe with lots of dissecant, seal pipe with lots of tape and wrap in tarp. Bury in backyard. Dig up every year for inspection and cleaning. Soak in solvent, clean, oil, grease, make sure you have all the parts, inspect all parts for damage, reassemble, test fire, make adjustments, clean, oil, grease, Ready to fire!
M-N: Throw in bottom of outhouse. Wait 50 years. Dig up. Bang on concrete to knock of large chucks of cr@p. Ready to shoot!
VirgilCaine
Member
- Joined
- Nov 24, 2005
- Messages
- 617
These are the best.
cracked butt
Member
AR: pa-sproing pa-sproing pa-sproing
AK: klacka klacka klacka
MN: BOOM
AK: klacka klacka klacka
MN: BOOM
silicon wolverine
member
AK can use ammo made anywhere in the world
AR Your ammo better have the exact right bullet weight for your twist or you wont hit anyhting
MN ammo was made by some guy named boris in 1938. Its green and fuzzy but it still shoots MOA
SW
AR Your ammo better have the exact right bullet weight for your twist or you wont hit anyhting
MN ammo was made by some guy named boris in 1938. Its green and fuzzy but it still shoots MOA
SW
db_tanker
Member
I believe of all of these...I can appreciate cracked-butt's post the most...
when I was in the army, and they made us DAT's go through BRM I discovered the ANNOYANCE of having a friggin' recoil buffer(?????) spring in my right ear while shooting a Mattel.
"WHANG, WHANG, WHANG"
IF i ever get a mattel for personal use, I WILL replace said spring with a hydraulic dampner...
D
when I was in the army, and they made us DAT's go through BRM I discovered the ANNOYANCE of having a friggin' recoil buffer(?????) spring in my right ear while shooting a Mattel.
"WHANG, WHANG, WHANG"
IF i ever get a mattel for personal use, I WILL replace said spring with a hydraulic dampner...
D
Fire4Effect
Member
4 Guys Shooting From Behind Cover
AK... unmistakeable
AR... unmistakeable
M.N. could be mistaken as t-34 tanks or offshore naval gunfire
M.N.... the real cause of the Red Army's "Scorched Earth" policy
AK... unmistakeable
AR... unmistakeable
M.N. could be mistaken as t-34 tanks or offshore naval gunfire
M.N.... the real cause of the Red Army's "Scorched Earth" policy
lee n. field
Member
- Joined
- Dec 29, 2002
- Messages
- 4,320
If only. Mine patterns like a shotgun.
"If only. Mine patterns like a shotgun."
I have several that pattern as well.
But, then there's the $50 beater Finn 1942 VKT rearsenal, with the barrel that looked like a sewer pipe. With the "match grade" Wolfe ammo, from a few years ago, I can hit 55 gallon drums at distances I won't even post. You wouldn't believe me unless you were there.
BTW, my MN m38 is the only rifle that I was ever asked to stop shooting on a range as, "too loud"!
I have several that pattern as well.
But, then there's the $50 beater Finn 1942 VKT rearsenal, with the barrel that looked like a sewer pipe. With the "match grade" Wolfe ammo, from a few years ago, I can hit 55 gallon drums at distances I won't even post. You wouldn't believe me unless you were there.
BTW, my MN m38 is the only rifle that I was ever asked to stop shooting on a range as, "too loud"!
orangeninja
Member
- Joined
- Dec 4, 2003
- Messages
- 3,117
Funny stuff.
AK: Ugly and practical.
AR: Slick and tactical.
MA: As slick as a fence post and twice as reliable.
Mine's not that great but this thread is.
AK: Ugly and practical.
AR: Slick and tactical.
MA: As slick as a fence post and twice as reliable.
Mine's not that great but this thread is.
silicon wolverine
member
"BTW, my MN m38 is the only rifle that I was ever asked to stop shooting on a range as, "too loud"!"
I got bounced one time when i was shooting my .416 dakota. It had a 16" barrel with a six slot muzzle brake. I generally put in foam plugas and them put muffs over the top. it was LOUD.
SW
I got bounced one time when i was shooting my .416 dakota. It had a 16" barrel with a six slot muzzle brake. I generally put in foam plugas and them put muffs over the top. it was LOUD.
SW
VirgilCaine
Member
- Joined
- Nov 24, 2005
- Messages
- 617
M-N...it's not a rifle, it's an emergency rescue signaling device!
Crosshair
Member
VirgilCaine
Provided that you don't accidentally down the rescue plane from the shockwave caused by the guns discharge.
Provided that you don't accidentally down the rescue plane from the shockwave caused by the guns discharge.
The_Antibubba
Member
Note the "AKs" made by Pakistanis with a charcoal forge, pliers, and two hammers. Illiterate communist factory workers are three steps above that. I challenge anyone without a machine shop and vocational training to make an AR-type that'll actually work.
FlyinBryan
Member
i just bought an ak and i cant hit the target
i just bought an ar and i cant afford a taget
i just bought an mn and are you going to finish that possum?
i just bought an ar and i cant afford a taget
i just bought an mn and are you going to finish that possum?
Gingerbreadman
Member
AK-metal and wood pieced together 50 years ago.
AR-metal and plastic pieced together 40 years ago.
MN-Mined from the Ural Mountains 90 years ago.
AR-metal and plastic pieced together 40 years ago.
MN-Mined from the Ural Mountains 90 years ago.
azhunter12
Member
- Joined
- Jan 22, 2007
- Messages
- 417
Good stuff.
- Status