Homer
Member
GEEEEZZZE
Well Tuner
I took the throat back to what I thought was flush with the feed ramp. Fired 160 rounds. First 6 mags went off without a hitch. Then I experienced 4 stem binds in the remaining shots. Much much less that before. Got home and checked fit again. Still had very slight overhang as evidenced by barely catching my fingernail. Took slight bit more off and will try later.
Did notice one thing about the fit of barrel to frame....
Checked again and there is about .010 movement to the rear with pin/link removed. Did not notice this until closley checking fit...
I do believe we have gotta er nailed down tho.
Might be a few days before I can try firing it again. Will let ya know tho.
Many thanks
Homer
Well Tuner
I took the throat back to what I thought was flush with the feed ramp. Fired 160 rounds. First 6 mags went off without a hitch. Then I experienced 4 stem binds in the remaining shots. Much much less that before. Got home and checked fit again. Still had very slight overhang as evidenced by barely catching my fingernail. Took slight bit more off and will try later.
Did notice one thing about the fit of barrel to frame....
Look at how far back the barrel sits in the frame pushed all the way back with the slidestop pin installed. Remove the link and check again to see how much difference there is.
No noticable difference.
Checked again and there is about .010 movement to the rear with pin/link removed. Did not notice this until closley checking fit...
I do believe we have gotta er nailed down tho.
Might be a few days before I can try firing it again. Will let ya know tho.
Many thanks
Homer