Rex in OTZ
Member
- Joined
- Nov 29, 2019
- Messages
- 616
Its now been like 5 years since Id purchased a used Chiappa M1-22 carbine.
First time out it functioned perfictly (above freezing temps**) the few following trips it had some issues with gummy parts from old lube.
Through cleaning and another outting and it was basicly a magazine fed single shot.
I looked again and tightened up a part that had backed out (recoil spring guide rod)
Make sure there is no gap between the hex portion of guide and where it threads into the op-rod.
The 3 threads out was enuf to cause short cycling and not fully resetting the hammer on firing.
**
