Flatten and golfball top of slide. Arrowhead pattern.
Rogers’ Tier One rear sight. .140” wide ‘U’ notch.
Rogers’ Whiteball front sight.
Rogers’ Bobnose package. Includes custom contoured match
bushing, flush cut and match crown barrel, custom recoil spring
plug, slant cut front of slide.
Carry/BHP cuts at front of slide.
Ball cuts.
Remove factory rollmarks from right side of slide.
15 degree large bevel at slide bottom.
Rework ejection port. Lower, flare, cut forward for ejection of loaded
rounds.
Fabricate and install custom ejector.
EGW oversized firing pin stop. Small cam radius.
2 tuned extractors.
Remachine rear cocking serrations to flute pattern.
Fabricate and install stainless steel feed ramp insert.
Ream and polish chamber. Throat barrel mouth.
Modify slide stop. Scoop cut top. Golfball bottom. Shorten and
radius pin. Chamfer frame hole.
Greider medium length trigger. Internally lightened.
Trigger job. 4 lbs.
EGW/Greyson lowered thumb safety. Custom contoured. Golfballed pad.
EGW grip safety. Custom contoured. Golfballed pad.
Extended magazine release. Angled. Golfballed.
High cut and golfball frontstrap.
Brown’s Bobtail mainspring housing. Custom contoured. Golfballed.
Bevel magazine well. 15 degrees.
Carry bevel package.
Wolff springs throughout.
2 8rd. Colt magazines with Wolff extra power springs.
2 pairs of Davidson grips. Custom contoured.
Sniper Grey Cerakote.