reloader_rob
Member
- Joined
- Mar 12, 2011
- Messages
- 20
I currently use the RCBS 10-10 in conjunction with the hornady LNL auto charge powder dispenser. I feel this gives me the assurance that the digital scale is dead on. It does throw a little light by .2/.1 grains and I typically take what it dispenses and dump that into the 10-10 scale to make sure it agrees and if it does not agree the and I will trickle up the charge until the 10-10 shows to be dead on the desired target. While doing this checking process the auto charge is dispensing another load.
just to make sure everything is in agreement I then take the measured charge from the 10-10 and remeasure it ( after pressing the zeroing function with an empty pan) back on the auto charge just for my own good feelings and confirmation. With one exception it has always measured exactly the desired target after correcting the charge on the 10-10.
I do want to purchase a scale with a higher resolution just to see how close this really is getting me.
I hope this helps in your decision.
just to make sure everything is in agreement I then take the measured charge from the 10-10 and remeasure it ( after pressing the zeroing function with an empty pan) back on the auto charge just for my own good feelings and confirmation. With one exception it has always measured exactly the desired target after correcting the charge on the 10-10.
I do want to purchase a scale with a higher resolution just to see how close this really is getting me.
I hope this helps in your decision.