Glock modifications

[mljdeckard]

I no longer have a Glock, I switched back to a 1911, but,

ALL of my defensive guns have night sights. I bumped into these guys at a gunshow and they installed them for free. www.topglock.com -I think they were out of Phoenix.

The single-biggest thing I don't miss about a Glock is the trigger. Like pushing a pencil into a wad of warm bubble-gum. I later read Massad Ayoob's explanation about the NY triggers and it makes sense. YES, they are heavier. BUT, they also are much more distinct and break cleaner, therefore being more controllable. If I get another one, I will definitely experiment with various trigger options.

 

[jjminch]

what is this .25 cent trigger job I keep hearing about? Can anyone cut and paste the explanation? I can't go to any sights with a "gun" name in the title at work, I keep getting blocked. Sorry to resurect the dead.

 

[whatbrick]

The .25 tigger-job is simply cleaning/polishing certain surfaces in the Glock to smooth out the operation of the pistol. This link should give more detail.

The smoothing of those parts will tend to happen naturally if you shoot a Glock (or any other firearm) enough.

 

[SouthpawShootr]

My Glocks are mostly stock. Only thing I always change out is the sights. I usually install Meprolights. I like very much the extended slide stops on the market. Particularly the Aro-tek version. Factory isn't that bad either. Came stock on my G37 & 38.

 

[jackinil]

2nd Gen. G19: 3.5#LWD connector,extended slide release,25 cent polish job and 3M tread tape on the grip.

 

[JohnKSa]

I put steel FRONT sights on. I've never had a problem with a rear sight--if you spend much time practicing one handed racking the slide using the rear sight for leverage then you might want to replace the rear sight as well but they're plenty sturdy enough for normal use. Glock now offers factory parts to accomplish these changes.

On guns that do primarily defensive duty, I think an NY trigger spring and a 3.5lb connector is a good idea. This provides a slightly heavier first stage than normal with a break that's slightly lighter than normal. The effect is that the entire trigger pull is about the same weight--much like a light double-action revolver trigger pull but with little to no stacking. Pull weight throughout the travel is roughly 6lbs (3.5lb nomenclature notwithstanding.)

On a gun that is going to be carried much, I think the "plug" is a reasonable addition. Leave it out if there's a good chance that the gun might get submerged. I'm NOT talking about shooting underwater--the space that the plug occupies allows water to drain out of the internals of the gun quickly and easily.

The extended slide release is another worthwhile mod. I use the slingshot method for reloading, but I can see that being able to easily operate the gun one handed has value in certain situations.

A metal recoil spring guide is a reasonable (though not a necessary) upgrade. If you're going that route, I recommend a flat-wire spring (like the factory spring) and a guide that uses a captive set-up like the factory rod.

I've done other things to Glocks--but only to ones that are meant for "play". I.e. strictly recreational purposes.

 

[Chris Rhines]

My Limited-division Glock 35 has a 2.5-pound trigger job from Charlie Vanek, Dawson adjustable sights with a fiber insert in the front, a Dawson magwell, and an ISMI recoil spring on a one-piece steel guide rod, don't recall the weight but it's a lot lighter than factory. Oh, and TruGrip grip tape.

- Chris

 

[raghorn]

Gen1 Model 17: Meprolight sights, Hogue Handall wrap-around grip and a "plug."

 

[Ethereal]

Glock upgrades:

Any gun will suit most right out of the box, but one of Glocks strongest points is it's customization factor. For me I always put on:
-NY#1 trigger spring (out of preference toward heavier pulls)
-steel guide rod (to add weight at muzzle, also out of dislike of polymer rods)
-Marine spring cups (a personal favorite, just in case)
-good steel three dot sights
-extended slide release (helps the left handed guys)
-frame plug
There are other things I change but those are the neccessities.

 

[BADUNAME13]

Night sites and ammo.

 

[Desertscout]

Depends on which one I'm carrying. The first pic is my everyday gun and the second one is my Sunday gun.

 

[qbpc]

What are you using it for?

If you stake your life on it I would only change the sights. This falls under the if it aint broke don't fix it. If it is going to be used in shooting competition only do any thing you want. Thats my honset opion
BB

 

[possum]

when i had my glock 19, i had the following upgrades:
1) xs 24/7 sights definetly worth it they are awesome sights, bright and easy to pick up in the day and low light conditions. they are quick on target and accuracy was very acceptable with em, during all drills that i put it through.
2) #3.5 trigger i liked it and though i don't really like the triggers on glocks to begin with this made it better.
3)extended slide release, noot necessary for me i like it with the stock slide release instead.

if i had a glock now there are things i would put on it that i didn't have before, and i would reaply all the above except the extended slide release.
i would add the above and ss barrel so i could shoot lead, a non captive guide rod, probally ss as well. and i think that would have it covered. i migh go with the trijicon night sights instead of the xs but there would be some sort of night sights on there.

 

[nwb01]

IDPA/USPSA production gun (G34):
sevigny competition sights
Ghost Rocket 3.5lb connector
Extra power trigger spring
.25 cent trigger job

USPSA Limited/Limited gun (G35):
Sevigny competition sights
Extended Tungsten guide rod
ISMI 15lb recoil spring
Ghost Rocket 3.5lb connector
Extra power trigger spring
.25cent trigger job
Dawson Magwell

Carry gun (G19):
Sevigny Carry sights
3.5 Glock connector
.25 cent trigger job

 

[Harley Quinn]

I have changed some springs and barrels. Plus a better rear sight on one that is for shooting the 400 Corbon ammo, the Mag release was changed on that one also. Mdl 21. I have a mdl 17L that has a real nice std slide that I got to go with the L receiver. I also have a few of the 22 conversions. I likeee

 

[weisse52]

On my Glock 19 carry gun.

Nothing, it works just fine as designed.

 

[The Lone Haranguer]

Meprolight night sights and an extended slide lock (the flat piece of metal with serrated tabs you pull down to release the slide), both from Glockmeister. They attend the big gun shows and they installed both parts (along with an upgraded retention spring for the slide lock) while I waited. Along with another magazine, $99 out the door.

I feel no need to change anything else.