Hello all, im new to forums, but not firearms (though im no expert either, just Joe Average gun owner)
a friend of the family inherited a gun and gave me a call to see if i wanted it. I gave him a set of golf clubs a while back that i had inherited as i dont play golf, and he said he was returning the favor sense he doesnt shoot.
my question is, do you guys think this is just a wall hanger? or would it be safe to shoot? I generally shoot only low recoil and .22 short (when applicable) in these old .22 revolvers anyway. shooting standard velocity in them only when pickins are slim.
I know the best thing would be to take it to a smith, but i havent found any i really liked in my area. and if i did, there cost may be more then the gun is worth anyway.
also, any idea how to take this thing down? I press the button in front of cylinder and pull the pin but it doesnt budge, so im having a hard time getting light to see the rifling and see inside the cylinder to check for pitting and rust. so for now, lets say there in decent shape. i have a few guns that look pretty rough on the outside but do to oil from cleaning, the rifling looks great. they shoot just fine and have for years.
also, everything seems to function fine as far as the moving parts. with the hammer back it locks up pretty tight.
Please, no harsh replies. Thank you for your help and opinion. and i of coarse will in no way hold anyone here liable for anything that could go wrong with the firearm in the even someones opinion is that its ok to shoot and it isnt.
a friend of the family inherited a gun and gave me a call to see if i wanted it. I gave him a set of golf clubs a while back that i had inherited as i dont play golf, and he said he was returning the favor sense he doesnt shoot.
my question is, do you guys think this is just a wall hanger? or would it be safe to shoot? I generally shoot only low recoil and .22 short (when applicable) in these old .22 revolvers anyway. shooting standard velocity in them only when pickins are slim.
I know the best thing would be to take it to a smith, but i havent found any i really liked in my area. and if i did, there cost may be more then the gun is worth anyway.
also, any idea how to take this thing down? I press the button in front of cylinder and pull the pin but it doesnt budge, so im having a hard time getting light to see the rifling and see inside the cylinder to check for pitting and rust. so for now, lets say there in decent shape. i have a few guns that look pretty rough on the outside but do to oil from cleaning, the rifling looks great. they shoot just fine and have for years.
also, everything seems to function fine as far as the moving parts. with the hammer back it locks up pretty tight.
Please, no harsh replies. Thank you for your help and opinion. and i of coarse will in no way hold anyone here liable for anything that could go wrong with the firearm in the even someones opinion is that its ok to shoot and it isnt.
Last edited: