Hellcat? Yes or no?

[jag1954]

I dropped an APEX threaded into mine. A very good shooter and my edc.

 

[Terry G]

I don't see the 365 as a better handgun. More like the equal of the Hellcat. I had a chance to fire both a lot and chose the Hellcat. Probably would have been just as happy with the 365.

 

[Alllen Bundy]

A big plus for the P365 series is the configurability options. You can use the shorter P365 slide with a 3.1" barrel, or the longer P365XL slide with a 3.7" barrel and have the option to install it on grip modules with 3 different grip heights that hold 10 rds, 12 rds, and 17 rds, respectively. You can swap grip modules in less than 30 seconds. You can tailor it to your specific concealed carry needs.

Then there are also aftermarket grip modules for even more options. Wilson Combat grip modules are designed to accept a 1.5 oz tungsten weight for better balance when you are low on ammunition. MagGuts makes spring kits to increase the 10 rd magazine to 12 rds, and the 12 rd magazine to 14 rds.

You can also get compensated versions. You can get it with or without a manual trigger safety. Once the fire control unit is out of the grip module you can install or remove the manual trigger safety in less than 30 seconds. You can install an extended magazine release button. Install an RDS.

You can install a curved trigger or a flat trigger. It requires pulling at the very tip of the trigger of between 3.5 and 4 lbs to release the sear, depending upon the spring tolerances.. If you are pulling at the middle of the trigger it requires about 7 to 8 lbs of force to release the sear. It is also has a one piece trigger hinged at the top which makes it less susceptible to contamination issues.

 

[Buckeye63]

Canik MC9 is one to look at
To me … its a bit chunky to be in the
Hellcat, P365 & GX4 size
It is more into the Shield Plus & G3C size
The MC9 uses mags from the larger 9mm Canik pistols… like the G3C uses the 15 & 17 round mags


But the MC9 has that great Canik trigger & reset

Myself I have a 15rd G3X & the GX4 with 13rd mags
Which Im hoping that Taurus comes out with a 15rd GX4 mag

 

[CNobbe]

Canik MC9 is one to look at
But the MC9 has that great Canik trigger & reset

I cannot wait to see the MC9. It's trigger is gonna be better than all of the others; word is it is a bit heavier.

 

[Buckeye63]

I cannot wait to see the MC9. It's trigger is gonna be better than all of the others; word is it is a bit heavier.

From every review I have seen the Canik MC9 has a great trigger .. probably the only Micro 9 that is close is the Shield Plus

But again .. from what I have seen the Canik like the Shield are a bit larger than the other micro 9
Close to the Taurus G3C size …. And that understandable.. being both pistols use mags that are a bit larger body than the others

Myself.. Im sorta gonna wait before I hope the MC9
Several reasons
#1 My GX4 with the 13+1 mag is great
#2 My G3X is a excellent pistol..basically the same size as the MC9 ( with the 15rd mag)
#3 The Dagger Micro ..