CRM284
Member
- Joined
- Mar 10, 2020
- Messages
- 79
So I took the bolt apart, cleaned it,a reinstalled. I don't like letting the gun set with the firing spring compressed, so I dry fired it. The BOLT GOT STUCK!! I dry fired it before with no issues. The bolt lifts about halfway through the cam, and stops. It doesn't matter how hard I yank, it won't cam open. I fiddled and fiddled,and it finally opened. I again took the bolt apart to make sure there weren't any obstructions inside the bolt. It was clean. This time I completely tore the safety apart. I inserted the bolt naked without the firing pin/spring, safety, ect, and it's smooth as silk. It's late so it's sitting like this until morning. I've read that there can be trigger issues when this happens, I'm not certain as I've never had issues before. I'm going to keep putting the bolt back together piece by piece, as I try running the bolt. BUT, AS I MENTIONED, the only time I have issues is after a dryfire, so this all seems like a waste to me. Maybe I'm wrong lol.
If anyone has had this happen before, please feel free to chime in. As I'm totally lost to how this just magically started after a cleaning. And I know it's installed correctly.
If anyone has had this happen before, please feel free to chime in. As I'm totally lost to how this just magically started after a cleaning. And I know it's installed correctly.