HK P2000 question

[TECH79]

What would i have to do to convert my HK P2000 9mm v3 to 40cal or 357 sig?

 

[10-Ring]

I'm not a big fan of caliber conversions...in my experience, you just end up dealing w/ alot of reliability issues you never had prior to converions.

 

[Sylvan-Forge]

• 40 or 357 slide assembly
• 40 or 357 barrel
• 40 or 357 magazine(s)

EDIT: Forgot to mention the recoil spring assembly

Not sure if the ejector is the same on 9x19 and 40/357. Could be a problem, esp. since it is molded into the frame.

Just the slide assembly and barrel will likely be the same price or really close to the price of buying a complete pistol.

You could get a complete pistol (in 40 or 357) and be able to shoot both calibers (40/357) with the only part needed being the barrel.

 

[Autolycus]

I would suggest checking www.hkpro.com

I believe just a barrel swap. I cant recommend a place to purchase the other barrels though. Your best bet is the place I suggested above.

 

[TECH79]

cool thanks guys..

 

[Edmond]

40 or 357 slide assembly
40 or 357 barrel
40 or 357 magazine(s)

Because of those reasons, I think that you'd just be better off buying the pistol itself.

Being that the .40 and .357 are a larger diameter for the barrel, just a barrel swap would not be possible.

 

[TECH79]

i guess its time to get a 40 cal lem then

 

[gudel]

Get one. I think you'll like it, don't let some cheap ass schmuck tell you otherwise. I like my P2000 LEM 40.

 

[Screehopper]

Not HK P2000, but a similar situation.

On my Sig P226R 9mm, it's not interchangeable. The manual specifically states that only between the .40 and .357 are the barrels interchangeable.