Master Blaster
Member
The flame cutting is self limiting and will not get any worse after a couple thousand rounds.
The 125 grain bullets driven to maximum velocities used large charges of relatively slow-burning powders. Handloaders know the powder types as WW296 and H-110, among others. The combination of slow ball-type powders and the short bearing surface of the 125 bullets allows prolonged gas cutting of the forcing cone and top strap area, accelerating erosion and wear.
Borescope studies of rifle, machine gun, and auto cannon chamber throats shows a lizzard-skin-like texture due to this gas cutting damage, called "brinelling". The results of brinelling are fine microcracks that weaken the surface of the steel, and further promote erosion. In machine guns and auto cannons, barrel life is measured in terms of "useable accuracy", and round counts that determine this are based on group sizes at engagement ranges.
In the K-frame magnums, the forcing cone dimensions combined with the barrel shank dimensions results in a relatively thin shank at the 6 o'clock position, where a machine cut is made to clear the crane. This is usually where the forcing cone cracks. The L and N frames use much beefier barrel shanks and do not have this cut. S&W intended the K frame magnums to be "carried much and fired seldom" service arms, designed to fire .38 Specials indefinitely, with light to moderate use of .357 Magnums. You notice that S&W has discontinued production of K frame .357 magnums, no doubt due to product liability issues and a couple generations of K frame magnum experience.