How Long is a Flash Hole uniformer?

[Archie]

Anyone have a Lyman or K&M Flash Hole uniformer and can tell me the length from the tip to the handle stop?

I like the idea. It is something I do to rifle cases. I have done this for a number of years (don't really remember) and will continue.
I have such a device now. The problem is it will not reach to a couple of the rather long cases I now reload. So I am looking for another such device but it must be at least X inches long in order to fulfill the function.

All the advertising I have seen omits this information. But they do tell me their's will work on .22 to .458 mouthed cases. Which I sort of knew already.

 

[Walkalong]

My old M&M will reach right at 2 3/4" into a case. Style has changed. Looks about the same length.

 

[Rule3]

Whay not call KM and ask them as to what caliber you want to work on????????

 

[BWS]

Bought this Lyman lastw week to screw into my new accessory handles.

 

[lightman]

My older K&M measures 2-3/4 inches and my Sinclair has a total length of 4 inches. The guide cone takes up some of that 4 inches. If you need longer you might look at the Sinclair tool.

 

[Metal God]

If using it on a 22cal my Lyman will reach about 2-7/8" about another 1/4" or so if larger caliber so 3" -ish

 

[murf]

my rcbs is 3.5" from tip to the base of the stop.

luck,

murf

 

[Archie]

The case alone is just a mite under three inches. 3.9x74mmR, it's one of those European dangerous game calibers.

Looks like I have to make one to fit. Thanks, everyone, I appreciate the trouble and time.

 

[rg1]

You can make your own. Most all the flash hole uniformers I've seen are simply a #2 Center Drill installed in a shaft. Buy a #2 center drill, drill the hole in the shaft, epoxy the #2 into the shaft. You can grind the #2 into to make two uniformers. It's hard and not sawable.
https://drillsandcutters.com/2-regu...qaXaB16jO_TjCDORDphckjqbGGc1__-hoC1MwQAvD_BwE