I just went through the remainder of my reloading supplies. I found,
1) RCBS Rock Chucker, single-stage press, complete with powder charge canister, trimming lathe, 4 or 5 different shell holders
2) 8 pounds of AA7 (years old), 8 half used 8 pounds of AA7.
3) 2 trays of primers (maybe 1000, likely Small Riffle or small pistol. Have to measure)
4) 9mm dies, 357 dies (need 10mm auto dies)
5) brass
Looks like I need
* 9mm bullets,
* 10mm dies,
* large pistol primers
At least to test. I'm going to load up some dummy rounds (blanks) in 9mm, to test the powder and primers. The powder has been stored in original containers, but the primers were about half exposed to air. Will test those first. I have a little over a thousand of those. But I'm going to measure each one. On the first couple I got 0.173 for width. This seems right for small rifle/pistol. But I will check the size of each and every one. And count them as well. That's enough 9mm primers to do me for a while. I have plenty of 5.56mm ammo, so won't need for that. Just need bullets.
And I have to find a source for 10mm bullets (these will be hardest to find, and large pistol primers. I'm sure I can find dies. I have only 150 commercial rounds, in 10mm.
View attachment 1005801