Black Toe Knives
Member
One I sold yesterday.
Lets see the knife pictures!
- Thread starter Skillet
- Start date
- Status
Gordon
Member
bikerdoc
Moderator In Memoriam
Collection of old Schrades,
Rupestris
Member
I suppose I could play along.
Slipjoints:
Lockbacks:
Imperials:
Bark River and Koster:
Rapid River custom hatchet:
Wilson Custom:
Becker BK7 that I "customized":
Slipjoints:
Lockbacks:
Imperials:
Bark River and Koster:
Rapid River custom hatchet:
Wilson Custom:
Becker BK7 that I "customized":
Luckydollar
Member
Most of mine are putaway. Someday I'll dig them out and shoot some current photos.
These are the sharp pieces of steel I actually use.
My Wetterlings 10" belt axe, my JK Hiker and EDC, my trusty SAK, and yes that is a cheap $12 Mora (carbon 860-MG)
These are the sharp pieces of steel I actually use.
My Wetterlings 10" belt axe, my JK Hiker and EDC, my trusty SAK, and yes that is a cheap $12 Mora (carbon 860-MG)
Stainz
Member
Ti framelocks: Buck 172 Mayo TNT; Benchmade 635BK Mini Skirmish; Benchmade 760BK LTi; Benchmade 630 Skirmish; Kershaw 1725SG2 JYDII.
The BM 760BK is the only knife still in production... you have to grab 'em when you can!
Stainz
The BM 760BK is the only knife still in production... you have to grab 'em when you can!
Stainz
Stainlessbutcher
Member
A few I had lying around my desk...
First up are two of my daily carriers, a Benchmade Elishewitz Stryker in ATS34 stainless and an old Case XX two blade
Next is what I carried this year hunting (minus the two folders that were in my pocket) Schrade stainless gut hook skinner, no name carbon steel knife, and a Ka-Bar USMC.
The Infamous Chicken Killer I built for my wife from a kit blade and a pair of cocobolo scales
Next are a couple of beaters I use around the farm. A United Cutlery Kukri, and a Coleman/Western skinner
These last two were christmas gifts to me this year, first is a Gerber field dressing kit, the second one is a "magnum" division of Boker fairly cheap japanese made knife probably designed after a Randall, but nowhere near the quality or price.
First up are two of my daily carriers, a Benchmade Elishewitz Stryker in ATS34 stainless and an old Case XX two blade
Next is what I carried this year hunting (minus the two folders that were in my pocket) Schrade stainless gut hook skinner, no name carbon steel knife, and a Ka-Bar USMC.
The Infamous Chicken Killer I built for my wife from a kit blade and a pair of cocobolo scales
Next are a couple of beaters I use around the farm. A United Cutlery Kukri, and a Coleman/Western skinner
These last two were christmas gifts to me this year, first is a Gerber field dressing kit, the second one is a "magnum" division of Boker fairly cheap japanese made knife probably designed after a Randall, but nowhere near the quality or price.
tomh1426
Member
Just a few of my favorites.
Benchmade 42
Benchmade 551 griptilian
CRKT ringed razel
Cold steel rifelmans hawk
SOG fusion tactical tomahawk
Benchmade 42
Benchmade 551 griptilian
CRKT ringed razel
Cold steel rifelmans hawk
SOG fusion tactical tomahawk
high voltage
Member
- Joined
- Nov 10, 2008
- Messages
- 30
My Emersons:
MT LCC:
P7 & MT Ultratech:
Some framelocks:
Custom folder:
BM 760 LFTi:
Emerson CQC-7 & Commander:
CR Sebenza (large 21):
ZT 301:
MT LCC:
P7 & MT Ultratech:
Some framelocks:
Custom folder:
BM 760 LFTi:
Emerson CQC-7 & Commander:
CR Sebenza (large 21):
ZT 301:
Black Toe Knives
Member
I took the classic Bushcrafter and made it mine. I took away the scandi edge and added a hollow ground and large choil so I could shorten the handle, this also allow you choke up on the knife for more control. I have three in this design.
5/32 thick D2.
Grind is a Hollow Grind.
Cutting Edge is 4''.
Overall Length is 9''
Construction is Full Tang.
Handle is Ironwood with Black Micarta Bolster with a mosaic Pin.
Sheath Included.
Warranty
I have a no non-sense Guarantee, you break it under normal use. I Promise I will fix or replace it as long as I am able to work in the shop. Plus if for any reason you are ever unhappy with it. Send it back to me for a "FULL REFUND" Because I don't make a knife I wouldn't love to own.
Jim Adams
5/32 thick D2.
Grind is a Hollow Grind.
Cutting Edge is 4''.
Overall Length is 9''
Construction is Full Tang.
Handle is Ironwood with Black Micarta Bolster with a mosaic Pin.
Sheath Included.
Warranty
I have a no non-sense Guarantee, you break it under normal use. I Promise I will fix or replace it as long as I am able to work in the shop. Plus if for any reason you are ever unhappy with it. Send it back to me for a "FULL REFUND" Because I don't make a knife I wouldn't love to own.
Jim Adams
- Status
