Unemployedshooter
Member
Finally went shooting after a long hiatus. Definitely rusty, but it came back to me.
From left to right:
1. Ruger Security Six
2. MAS 36
3. M&P40 (with 9mm Silencerco barrel)
4. Canik TP9SF Elite
5. RIA MAPP 22TCM9R (with 9mm Witness barrel)
First time shooting the Ruger. Ran mostly .38, but a few cylinders of .357. I spent more time shooting this than anything. Rang steel at 50 yards when I did my part. First time shooting the MAS 36 as well, due to a broken firing pin. Great little rifle, wish ammo had more manufacturers. M&P40 was great as usual. Have an Apex in it and it breaks so nice. The Canik ran brass and steel and was plenty accurate. Generally would not lock back on empty. Not sure if ammo or stiff recoil spring (heavier than M&P40 spring plus a heavy slide). Was running 115 grain Wolf and 124 grain Blazer brass. Great stock trigger. Was so much fun, I forgot to watch the ejection pattern as this is the major complaint about this gun. The MAPP does not like steel cased, but was plenty accurate once I adjusted the sights. Shooting several inches low from the factory.
Anyone know what acceptable accuracy out of the MAS 36 was when issued? Has a thick front sight post and a horrendous trigger. Rear sight is a nice aperture. Might look into tinkering with the trigger if possible.
Thanks for reading
From left to right:
1. Ruger Security Six
2. MAS 36
3. M&P40 (with 9mm Silencerco barrel)
4. Canik TP9SF Elite
5. RIA MAPP 22TCM9R (with 9mm Witness barrel)
First time shooting the Ruger. Ran mostly .38, but a few cylinders of .357. I spent more time shooting this than anything. Rang steel at 50 yards when I did my part. First time shooting the MAS 36 as well, due to a broken firing pin. Great little rifle, wish ammo had more manufacturers. M&P40 was great as usual. Have an Apex in it and it breaks so nice. The Canik ran brass and steel and was plenty accurate. Generally would not lock back on empty. Not sure if ammo or stiff recoil spring (heavier than M&P40 spring plus a heavy slide). Was running 115 grain Wolf and 124 grain Blazer brass. Great stock trigger. Was so much fun, I forgot to watch the ejection pattern as this is the major complaint about this gun. The MAPP does not like steel cased, but was plenty accurate once I adjusted the sights. Shooting several inches low from the factory.
Anyone know what acceptable accuracy out of the MAS 36 was when issued? Has a thick front sight post and a horrendous trigger. Rear sight is a nice aperture. Might look into tinkering with the trigger if possible.
Thanks for reading