Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old High Contrast theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
The trigger on my M&P 9mm is to hard to pull.... about 10lb. Who has springs or parts to make it 4-5lb? Is there a good web sight that has info on mods for the M&P?
I have done this to my M&P 45 and was worth the effort. It's actually quite easy to do, just take your time. I installed a standard Glock (5lb) striker spring on my M&P and it made a noticeable difference as well. The stock M&P striker spring is very stout.
Where can I get a trigger return spring? Just holding the grip frame with the slide removed the trigger pull is at least 7lb, thats al in the return spring.
It's not the trigger return spring. The trigger pull on the M&P series is a combination of factors; how far the striker is moved rearward, the firing pin stop plunger spring, the angle of approach between the firing pin plunger and the trigger bar, and of course the striker spring itself. There is also some geometry involved. These are taken into account using the method detailed by Dan Burwell.
There is no benefit in changing just the trigger return spring.
Where can I get a trigger return spring? Just holding the grip frame with the slide removed the trigger pull is at least 7lb, thats al in the return spring.
If this is correct then you have something else wrong. With the slide removed the trigger pull should be very light and smooth, maybe 1lb or so. You need to get it checked out before you do anything else.
Thanks Hags, Thats what I needed. After about 1/2 hour of work it made a huge improvement. I still think a lighter return spring will help along with the other mods.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.