Drakejake
Member
I raised this question some months ago. I replaced a slew of parts, but still have no firing in double action, but everything is fine in single action. I did the pencil test, i.e., I put a pencil in the barrel, pointed the pistol up, and pulled the trigger. In single action, the pencil jetted upward. In double action, it didn't move. So the hammer apparently is not hitting the firing pin in double action. If the safety were the problem, wouldn't I also have the same problem in single action? I replaced the mainspring. I have tried to do all the standard things to make it work. I am guessing someone out there will know why the Mak fires in single action, but not double action.
Thanks,
Drakejake
Thanks,
Drakejake