need 41 mag loads

[LUCKYDAWG13]

just picked up a Ruger 41 magnum 4 5/8 barrel and i sent for a lee 195gr mold
so if you have a pet load for this pleas share. this is my first 41 so i don't know
a lot about this caliber if you have a minimum and max for this using
H110 2400 or ? thanks

 

[41 Mag]

If those powders are all you have to work with go with the 2400, and pour your bullets from straight clip on wheel weight alloy. You might pour up say a hundred at first, and water drop half to see which one it likes the best. I size mine to .410 or .411, depending on which sizer I use. These really shouldn't need sizing, but you will have to check to be sure.

My Redhawk takes them just fine air cooled, but my friends S&W likes them quenched. We both have used AA powders the most with these, but I have shot some using Unique, and Bullseye as well. IMO these run well with the faster powders, but I haven't tried them using the slower, I use the 215gr version for those.

 

[LUCKYDAWG13]

I do have bullseye and red dot and some W231 i jut thought that
the H110 and the 2400 would work better these are the powder
that my Ruger B/H 44 mag like

 

[tightgroup tiger]

9.5 gr of Power Pistol works with lead or plated fro light plinking loads.
I also use two loads of 2400, 17.5 gr and the maximum of 19gr.

 

[RealGun]

need 41 mag loads

--------------------------------------------------------------------------------

just picked up a Ruger 41 magnum 4 5/8 barrel and i sent for a lee 195gr mold
so if you have a pet load for this pleas share. this is my first 41 so i don't know
a lot about this caliber if you have a minimum and max for this using
H110 2400 or ? thanks

You will find 41 Mag loads for that bullet type/weight with those powders in the Lyman Cast Bullet Handbook, 4th Edition.