762x51
Member
What don't you like about the chisel grind Steve? The CQC-7A has a traditional spear point instead.
Need a Knife Suggestion
- Thread starter sm
- Start date
- Status
Steve Smith
Moderator Emeritus
Not talking about the tanto tip, that's fine, but talking about the one sided chisel grind. Having worked in a knife shop for several years for "gun money" I saw more than a few of those CQC's ruined by folks who didn't understand the chisel grind. I always thought it went dull faster than a double grind becuase the edge lacked support. In addition, the chisel will push the knife sideways through the cutting stock. Lots of negatives on the chisel grind. Good edge for slicing flesh open though...better than double grind because there's less friction.
Jack19
Member
I've had trouble with Benchmades, not with the blade or actions but with the pocket clip screws constantly backing themselves out. The instruction manual says that Locktite is contraindicated. Any ideas?
Steve Smith
Moderator Emeritus
Jack, I had that problem with my first Benchmade, called them, and they said locktite them!
Tamara
Senior Member
All I can tell you is that peeling an apple right-handed with one of Ernie Emerson's designs is contraindicated... 
sm
member
Hi Tamara.
Since I'm obviously new to this, I have no idea of which you speak. I do believe you though. You have any suggestions, with pics?
Since I'm obviously new to this, I have no idea of which you speak. I do believe you though. You have any suggestions, with pics?
Tamara
Senior Member
Myself?
99.99% of the time, you'll find me with an old Sebenza in my left pocket and an Emerson Commander in my right.
(What I was referring to about the Emerson is that the chisel grind is backwards for normal right-handed usage, such as peeling apples or opening envelopes, because holding the knife in your right hand and the object to be cut in your left puts the beveled edge facing the object. It kinda hampers delicate work.)
Other frequently-carried knives that I like: Benchmade 910 Stryker, Microtech Lightfoot LCC, Kershaw Vapor II, Spyderco Massad Ayoob or Shabaria. Sometimes my Beretta Avenger or one of my customs if I'm dressing nicely...
99.99% of the time, you'll find me with an old Sebenza in my left pocket and an Emerson Commander in my right.
(What I was referring to about the Emerson is that the chisel grind is backwards for normal right-handed usage, such as peeling apples or opening envelopes, because holding the knife in your right hand and the object to be cut in your left puts the beveled edge facing the object. It kinda hampers delicate work.)
Other frequently-carried knives that I like: Benchmade 910 Stryker, Microtech Lightfoot LCC, Kershaw Vapor II, Spyderco Massad Ayoob or Shabaria. Sometimes my Beretta Avenger or one of my customs if I'm dressing nicely...
sm
member
Thanks Tamara.
Duh, I shoulda known that. I used to use gravers and hand hone a particular 'edge' for a task. Can't cut if designed to go another way--yeah--I tried--don't work.
I'll do a search, unless you have a pic. Source?
Duh, I shoulda known that. I used to use gravers and hand hone a particular 'edge' for a task. Can't cut if designed to go another way--yeah--I tried--don't work.
I'll do a search, unless you have a pic. Source?
Steve Smith
Moderator Emeritus
Tamara knows of which I speak! LOL The apple did it for you, huh?
I used to have a 910 as well, but some nice lookin' hussy walked off with it. Never saw her or the knife again.
I used to have a 910 as well, but some nice lookin' hussy walked off with it. Never saw her or the knife again.
762x51
Member
Ok...yes I agree. It isn't the best for those types of tasks. But, thats what my Obenauf is for.
I guess I am very lucky in that I have a knife shop close at hand.I watch the used cases and I have picked up 2 benchmade for about 1/2 price.Both excellent and showed a min of wear from carry.Allso check pawn shops for used ones.They are easy to check out for wear and about the only thing that gets messed up is the edge from someone that does not what they are doing.Even that can be fixed with a little work.Cost savings are great doing it this way.
Good Luck
Bob
Good Luck
Bob
cold
Member
New guy here, first post. My all time favorite is the MOD Hornet. Slick, smooth, but 3.1 inches, if can get by with 0.1 over your limit. It is thin, rides low, good steel, and feels great in the hand for a small knife.
Oh wait, I pulled out the tape measure and the sharpened length is just under 3".
Mike
Oh wait, I pulled out the tape measure and the sharpened length is just under 3".
Mike
Line Rider
Member
I carry either my Spyderco Police or Recuse. Also I carry an Old Timer Stockman.
sm
member
Still learning and listening.
Last edited:
Jack19
Member
Steve and Tamara, LOL, thank you very much....
bad_dad_brad
Member
Give the smaller Timberline Kelly Worden tactical folder a look see. Excellent knife. Reasonable in price. Sharp. Light weight. Fast to open. Strong lock. Safe for the user.
Not only is the blade a weapon, but the handle with blade closed makes a good sap. And the small brother is legal most places. Liner locked you can one hand open and close this tool very effectively.
Not only is the blade a weapon, but the handle with blade closed makes a good sap. And the small brother is legal most places. Liner locked you can one hand open and close this tool very effectively.
labgrade
Member In Memoriam
I'll hafta bite here.
Been well served (I thought) till reading more 'n more about knives - & always willing to learn.
What is up with the "better" knives that one can't get from a very sharp blade that does the job?
Curious that seemingly "the job" can be done so much better .... or is this just another where personal preference is the deciding factor?
A very good bud's a paramedic-type & swears by his Spydy-Cos/serrated (cuts seat belts like the Dickens, but so will any very sharp blade) ... what's the diff? & why?
(Steve, I shouda talked to ya longer .... )
& there's so many applications (as Steve indicated) for a blade; "just" cutting, defense, yada ....
Been well served (I thought) till reading more 'n more about knives - & always willing to learn.
What is up with the "better" knives that one can't get from a very sharp blade that does the job?
Curious that seemingly "the job" can be done so much better .... or is this just another where personal preference is the deciding factor?
A very good bud's a paramedic-type & swears by his Spydy-Cos/serrated (cuts seat belts like the Dickens, but so will any very sharp blade) ... what's the diff? & why?
(Steve, I shouda talked to ya longer ....
)& there's so many applications (as Steve indicated) for a blade; "just" cutting, defense, yada ....
nascarnhlnra
Member
How about an Emerson Commander they come in full size and mini. I have a mini commander for my everyday carry knife and love it. The CRKT Casper Pro is a nice folder too.
sm
member
Bought
Kershaw Leek, a Ken Onion design, #1660
I was going to wait, but due to 'recent events' stepped up my purchase. I handled a bunch of different brands and styles as suggested, had to consider budget. Final choice was hard. I also used the input from a friend whom has been in SF, and "other stuff". I will seek some training from him, he had BTDT. One of his EDC is this knife.
I will have to wait on the Benchmades, and Microtech's until $ is better, this I think will be a great learning tool. Oh, I re checked the law here: 3.5" blade legal limit. Yes this knife is legal here (auto assist opening). Retail: $42.00
Thanks everyone, I have and will continue to learn.
'73
Kershaw Leek, a Ken Onion design, #1660
I was going to wait, but due to 'recent events' stepped up my purchase. I handled a bunch of different brands and styles as suggested, had to consider budget. Final choice was hard. I also used the input from a friend whom has been in SF, and "other stuff". I will seek some training from him, he had BTDT. One of his EDC is this knife.
I will have to wait on the Benchmades, and Microtech's until $ is better, this I think will be a great learning tool. Oh, I re checked the law here: 3.5" blade legal limit. Yes this knife is legal here (auto assist opening). Retail: $42.00
Thanks everyone, I have and will continue to learn.
'73
45R
Member
Benchmade Knives
Benchmite
Any of the Osborne knives
Griptillian series
They will all serve you well
45R
Benchmite
Any of the Osborne knives
Griptillian series
They will all serve you well
45R
Ivy Mike
Member
Another good company to consider would be Columbia River Knife and Tool. I carry a CRKT M16-00K everyday. While too long for your requirements, the M16-00K is a straight edge, tanto point made of AUS-6 steel with an aluminum handle. Liner lock is unobtrusive, yet strong. The other great feature is the LAWKS safety that allows you to lock the blade open even if the liner lock is depressed. The blade has a titanium-nitride coating and holds an edge very well. The patented Carson flipper on the back definitely helps with opening.
Perhaps one of the roll-lock designs would work. Great company and customer service is top-notch.
Perhaps one of the roll-lock designs would work. Great company and customer service is top-notch.
- Status
