New product alert - A new 2 in 1 Annealer & Prep center....

[Burstfire]

@Crosshair

Yes they all industry standard parts, rated for 60k hours. Can be easily replace with a soldering kit. For wear and tear parts, such as the motor, we’ll cover it the first year. Anything wrong with it send it back and we’ll cover all repair/replacement. After that, you can replace it yourself, or purchase the part from us. $15 each motor. Or ship it back to us and we’ll quickly repair / replace them for you, still $15.

Yes, they are 8-32 thread, and those RCBS will work on there. You will need to use the regular speed for those, and not the reduced speed, since you usually need to remove a good amount of material to remove the crimp (depending on the headstamp). But for swaging, personally, I say get a Lee APP with swage kit and never look back lol.

 

[Burstfire]

Man, who thought it would be this hard to give S#&t away……

2nd week of holiday giveaway. None of the winner have yet to respond to claim their prizes. Last week’s winner was a website subscriber. No response. So I picked 2 winners this week. Both Instagram followers. One I had to request follow, which he accepted, so I can message him. Stopped responding afterwards. ‍

Maybe I need to close shop. Can’t even give free stuff away. Lol.

Hopefully someone will come forward to claim one of the annealers next week!

if anyone here is interested, go follow our Instagram, or subscribe on our website to enter. Or do both and get double entry. We are giving away something each week. Next week, on Christmas Eve, I will be giving away one of the annealing machines.

***Going to draw 2 new winners this week, on Wednesday, if those 2 guys don’t respond by then.

 

[troy fairweather]

I'd like one just broke at the moment.

 

[Crosshair]

Man, who thought it would be this hard to give S#&t away……

2nd week of holiday giveaway. None of the winner have yet to respond to claim their prizes. Last week’s winner was a website subscriber. No response. So I picked 2 winners this week. Both Instagram followers. One I had to request follow, which he accepted, so I can message him. Stopped responding afterwards. ‍

Maybe I need to close shop. Can’t even give free stuff away. Lol.

Hopefully someone will come forward to claim one of the annealers next week!

if anyone here is interested, go follow our Instagram, or subscribe on our website to enter. Or do both and get double entry. We are giving away something each week. Next week, on Christmas Eve, I will be giving away one of the annealing machines.

***Going to draw 2 new winners this week, on Wednesday, if those 2 guys don’t respond by then.

Oops. Completely missed this. Went and signed up. Who knows, might get Lucky and win one before I can buy one. Haha.

I'm for sure going to get one. Just have other irons in the fire at the moment. I'm making 7.5 French out of 270 Winchester once fired brass as well as loading 401 GNR. Both of those alone would benefit heavily from an annealed.

Having the prep station makes it attractive an purchase. I also want to support a product built for easy repair.

 

[markr6754]

Maybe I need to close shop. Can’t even give free stuff away. Lol.

Hopefully someone will come forward to claim one of the annealers next week!

Please don't close shop until after the following occurs:
1. My order ships
2. My Limited Lifetime Warranty expires

 

[Burstfire]

Please don't close shop until after the following occurs:
1. My order ships
2. My Limited Lifetime Warranty expires

haha i'm jk. we are doing great and not closing up shop. Burstfire annealer and the website is something new, but we've actually been in business for about 5 years now. Mostly wholesale brass, components, and other items they don't order large qty of to local shops, gun ranges, 06 dealers, etc.

By the way, as previously mentioned, we are working hard to get all shipments out, but did hit a small snag last week. On Friday our 68 years old shipper and his wife got covid and hospitalized. So We are unfortunately a bit short staffed.

For all orders that have been delayed over the last couple of week, it will include a free gift (Burstfire Case Prep Tool Set).

@markr6754 Your order specifically should be processing shortly. Saw your order in this week's print out folder. You should see a label generated shortly, and hopefully have it packed and out the door by end of the week. Thanks for your patience.

 

[Cheesemaker]

Shipping email received - thanks @Burstfire.
I have some tempilaq, may have some gas, may need more.

Happy holidays!

 

[Burstfire]

Shipping email received - thanks @Burstfire.
I have some tempilaq, may have some gas, may need more.

Happy holidays!

Hope you got the 5% THR credit as well!

I’m still here packing and shipping, so it isn’t going out today. I’m sorry =(. Employee and his wife still out / hospitalized. I’m just getting everything on this week’s batch printed out. Trying my best to get everything out this week, but I do apologize in advance if I don’t for everyone here that ordered. I am trying to find some temp workers while Joe gets back on his feet, hopefully next week.

Just FYI to give everyone a sense into why there’s a delay. Order volume wise, there’s about 80 I am working on getting out by end of the week. Perfect storm scenario, our website / order system is not consistently syncing with ups or usps. It won’t print out the damn label when it’s not sync’d (or whatever they call it). Just gives me an error message. Which means I have to go on our ups or usps account and type out each one manually to create the label….

The 80 orders this week is a combination other stuff on our website, and Annealers. For annelers, they are packed inside another box, with foam cut out specific for it, include hose and torch, taped up, and then we use clear stretch wrap it all over it before we slap the label on it.

Again, this is no excuse to make customers wait for what they already paid for. Even if an advance notice is given. I may go down to Home Depot and bring in a couple of guys to pack boxes while I do the others stuff tomorrow.

A free set of Burstfire case prep tool set will be included for the delay. Or a gift card to our website. Will reach out right before shipment to confirm your preference.

 

[Burstfire]

By the way, side question for everyone.

Maybe there’s a way to do a poll, but I’m not sure how. perhaps just feedback is fine.

we offer the Annealers in black, and grey. Most order (80%) are all for the Grey. What’s wrong with the black? If we were to offer them in other colors, what would you like to see?

 

[Zahn]

By the way, side question for everyone.

Maybe there’s a way to do a poll, but I’m not sure how. perhaps just feedback is fine.

we offer the Annealers in black, and grey. Most order (80%) are all for the Grey. What’s wrong with the black? If we were to offer them in other colors, what would you like to see?

Gray is fine for me; I know that will be the color I pick when I order mine. I have found that black tends to show dust more. I can't think of another color I'd like. Well, maybe classic Ford blue.

 

[Cheesemaker]

Hope you got the 5% THR credit as well!

I’m still here packing and shipping, so it isn’t going out today. I’m sorry =(. Employee and his wife still out / hospitalized. I’m just getting everything on this week’s batch printed out. Trying my best to get everything out this week, but I do apologize in advance if I don’t for everyone here that ordered. I am trying to find some temp workers while Joe gets back on his feet, hopefully next week.

Thanks, I did get the credit. No rush on my side.

As far as colors go - I agree with post #35 by @Zahn I think grey is "cleaner" - at least cleaner looking.

 

[Soonerpesek]

SOONER Crimson............

 

[Crosshair]

@Burstfire I emailed an order request, but Thunderbird glitched. If you get 20 copies of the email, my apologies.

 

[markr6754]

I ordered the Grey unit as my storage racks are grey and it just looked more satisfying. The only other color I’d have opted for is stainless/bright aluminum.

 

[Burstfire]

My goodness. Last of the site launch and Black Friday / cyber Monday are going out today. Will be able to start working on all the other orders tomorrow!

Those of you that had placed an order, these will be going out this week! But I’m sorry Santa can’t bring you your new toy by Christmas.

Thanks for the feedback on colors. Will be keeping grey, but may not do black again on next run. Keeping grey as primary, but do limited runs on some fun colors.

Also, FYI. We are getting another shipment of our case prep tools this week. The first shipment flew out the door. If the below is true for you, we fixed it:

• Dull cutting tools that don’t last long (chamfer / Debur).
  
• Primer pocket reamers suck. Takes too much effort to cut.
  
• Or you just never liked the idea of a reamer seeing how much brass is shaved offs.
• Swaging is great, but it’s sucks that it has to be an extra step and it’s manual process.

If you load 223 / 300 blkout, those with a stubborn crimp, you know the pain! We redesigned the reamer, and reaming is now the easiest step. I just put up a video demoing it. Check it out.

 

[markr6754]

Will be able to start working on all the other orders tomorrow!

Those of you that had placed an order, these will be going out this week! But I’m sorry Santa can’t bring you your new toy by Christmas.

Actually, I'm pretty happy that my order won't arrive for Christmas. I was dreading having the biggest gift under the tree and trying to explain that to my grandkids. Pressure is off now...AND, I won't have to buy additional gifts to balance the "Christmas Budget".

 

[Burstfire]

Holy smokes. Finally. Caught up on all shipments, and everything is out the door! All orders will now ship within 24 hours.

Joe’s still recovering and not yet back at work. But man, Joe needs a raise when he gets back!

 

[Gooseman69]

I'll stick with my amp annealer

 

[Burstfire]

I'll stick with my amp annealer

If you got the money, don't need to do large batches, and have OCD over small details, certainly can't beat an AMP. I own one as well. lol.

 

[troy fairweather]

For colors I'd think red and a green would sell, guys like matching there other equipment, blue I don't think would sell to much them Dillon guys don't like when something doesn't say Dillon on it. I'd opt for stainless myself.

 

[koni]

For colors I'd think red and a green would sell.

+1 for red

 

[Burstfire]

Alright guys. Almost time for the grand prize!

Winner for the 2 in 1 prep center will be announced Christmas Day morning. Sign up on website if you have not done so already.

Good luck guys!

 

[JemezDave]

Looks good I am interested. I like red and green also. Are these panels painted or powder coated?

 

[Burstfire]

Looks good I am interested. I like red and green also. Are these panels painted or powder coated?

multi-coat powder coating.

Thanks for the feedback everyone. I like red as well.

 

[Big_Country]

Shot you a PM