Now THAT'S a belt!

Status
Not open for further replies.

armoredman

Member
Joined
Nov 19, 2003
Messages
19,256
Location
proud to be in AZ
High Noon Holsters’ Rock Steady Gun belt

After a few years in a desk position, I noticed an unfortunate “expansion”, located somewhat around the middle. Oops. This in turn meant I had to “widen” my work belt supply. So, being frugal, (AKA, cheap), I decided to buy a replacement down at a local major clothing retailer, “off the rack” as it were. Well, one belt turned into about 5 over a year, as I discovered something that SHOULD have been quite obvious from the get go – dress belts have no “oomph” when it comes to holding up the nifty selection of gear I need for work. After belt number 5 showed signs of giving up the ghost less than 1 month after I bought it, I had had enough. I needed something with style and staying power, and I turned to High Noon Holsters, and their Rock Steady belt. I requested a 1 ½ inch in black finish with brass/gold buckle to fit my employer’s requirements.
I have to say is when I saw the measuring system they requested, it looked goofy. I knew my pant size wasn’t that big. Friends and neighbors, this thing works – USE it. When my belt showed up, it was a perfect fit. But, I get ahead of myself…

First things first, I got a call at work that a package had been dropped off by a certain big brown truck – love those guys. When I walked in the door, I saw this label. Oh, yeah…

HNbox.jpg

When you see that, you know two things - 1), the contents are going to be awesome, and 2) UPS has a dirty conveyor belt. I can live with that.

Contents, you ask? Why, this was inside that little brown box of wonders! Yes, I KNOW it says “44”, I told you I had expanded!

beltinbag.jpg

The first impression was high quality in every stitch, and quite surprisingly it was NOT nearly as heavy as I expected. I slid the Rock Steady on right away, to my wife’s vast amusement, and it was PERFECT. Remember that cheap belt? Here it is with the Rock Steady…see if you can guess which one is which.

beltcomparison.jpg

This is a GUN belt, and I looked forward to putting it to the test – I carry a lot of gear, and I don’t use a regular Sam Browne or other duty belt in my present position. Here’s everything that I would ask it to lug for me.

Batmangear.jpg

I know, putting dirty old nylon on that fine leather is like drawing a smiley face on the Mona Lisa, but I lack fundage to replace it just yet. No, no kitchen sink, and no Taser, but that’s my daily load. Is the Rock Steady up for it? Laid the gear in order out on top – I thought that old holster wasn’t going to fit, (which would have REQUIRED a new rig from High Noon, right, honey?), but when I did try it, it slid on. Dang.

Batmanbeltlaidout.jpg

Off to work I went. First thing I noticed about the Rock Steady and the uniform required gear is what it DIDN’T do – it didn’t move. The cheap belt sagged immediately and stretched, showing wear easy to see in the above picture – that’s 1 month worth of use. The Rock Steady just said “bring it on”. It feels like being wrapped in gentle steel, as it goes right where it’s supposed to go, but it doesn’t move when in place - just like its name says, absolutely rock steady. I also wore it off duty with my off duty rig, (far less stuff, thankfully), and found the exact same thing. It is a bit tight fit with some of the “other brand” leather gear I bought a while ago, but they slid on finally, and the Rock Steady held everything right where I put it, even concealing a full size duty pistol under a t-shirt in Arizona June weather. Might be time to upgrade the off duty rig too.

So far I have showed this off at work to several co workers, and all I can say is the color green is in the air…

Rock Steady – I discovered it’s not just a catchy name, it’s the truth.
 
Last edited:
Thanks for the review. I am a High Noon fan, but don't yet have a Rock Steady belt and have been looking at them for a while.

I'm glad the sizing worked right for you. Their instructions are different than other belt makers sizing and I was concerned about doing it wrong.

The Rock Steady has a reputation for being thicker than many others. Another concern I've had is do you have any trouble with feeding the belt through the first loop on your pants on the left. What you are putting through that loop is basically four layers of leather. Is it any more difficult fitting through that loop than your regular belt?

Thanks for the review.

Did you mention in another thread there is a "Down Under" review on the way? I'm looking forward to that one too.
 
No problem at all with any of the pants/jeans I have used it on so far, including Wrangler and Haggar. It fills the belt slots, but nothing more. The worst was the older leather gear made for slightly narrower belts. Tight fit, but they will go on with effort.

As for the other...maybe, maybe... :)
 
I had Big Jim of C5 Leather make me up one very similar to that! The belt I got is black with brass parts. The belt is just narrow enough to fit my belt loops on most pants - 1.75" wide and 1/4" thick.

http://www.c5leather.com/images/albums/NewAlbum_c4de4/tn_1200_1DSCN0282.jpeg.jpg
tn_1200_1DSCN0282.jpeg.jpg

http://www.c5leather.com/images/albums/NewAlbum_c4de4/tn_1200_1DSCN0282.jpeg.jpg
 
Status
Not open for further replies.
Back
Top