Online for Pistol Powder

Status
Not open for further replies.

OilyPablo

Member
Joined
Sep 2, 2012
Messages
3,126
Location
WA State (NOT in Seattle)
Can someone point me in a direction of a company that has powder in stock that I use for .45ACP and 10mm?

Any handgun powder. Doesn't have to be the same for each.

Thanks!

OP
 
Can someone point me in a direction of a company that has powder in stock that I use for .45ACP and 10mm?

Any handgun powder. Doesn't have to be the same for each.

Thanks!

OP
Midsouth has some 5744. It is the closest thing to pistol powder I can find. Description says it is made for "magnum" pistols, so don't know if you want it but here it is. http://www.midsouthshooterssupply.c.../Accurate-Nopoint-5744-Smokeless-Powder-(1-Lb)
Sorry, but it's the best I could do. Hope you find something.
 
Last edited:
Powder Valley has Longshot which is a great powder for the 10mm, I dont have experience with it in 45acp but Hodgdon website says it will work
 
I see you already bought something, but BE-86 mentioned above worked really well for me in 45acp and 357mag. It should work well in 10mm.
 
Powder Valley still has HS6 (1 & 8 lb) and Long shot (1lb)
The HS-6 was just put on the site because it wasn't there at 8:30 in the morning. I also see some Lil'Gun, LVR and Hybrid 100V that wasn't there before. I just might have to order an 8lb jug of HS-6 if I can find enough of what I need to cover the Hazmat.
 
In the past I have used
3rd Gen shooting supply
Graf and Sons
Natchez
Recobs
Widners

Pistol powder comes and goes, goes much faster than it comes in :banghead:
Glad you found some.


Don't own a 10mm but I have have used Longshot in .45 ACP when I had nothing else it went bang and sent rounds down range.
I was not after heavy loads and that is where Longshot is at its best.
I used 6 gr under a 230 and 6.5 under a 200 lead SWC. Don't have the OALs and I did not do a big work up to find where it was best, just enought for function.

It is LOUD this can be a big :D or a pain depending.
 
Last edited:
Status
Not open for further replies.
Back
Top