Pistols I'd like to see made
- Thread starter hkmp5g17
- Start date
- Status
jashobeam
Member
Ruger Single Action .454 or .475
How about a Ruger SA .454 or .475? Something like the Freedom Arms revolvers, but cheaper.
They could call it the Super Duper Blackhawk.
How about a Ruger SA .454 or .475? Something like the Freedom Arms revolvers, but cheaper.
They could call it the Super Duper Blackhawk.
"Hey albanian- do all Kahrs require a tool to field stip for routine cleaning? Not something you can do quickly and easily, or about average?"
No tool is required but sometimes the slide release lever is a little hard to push out when the gun is new and that creates some problems. Since you have to hold the slide open about an inch and remove the slide release at the same time, if the slide release won't push out, it gets tricky. They tend to loosen up with use. I had one that was really stiff so I just cut a piece of plastic to fit inside the slide and that held it back the distance I needed. All I had to do then was tap the slide release out with something, the handle of a screwdriver works great.
Sounds complex but really isn't. Once you have done it two times, it is not that much harder than taking apart a Glock. After the slide release lever is removed they field strip just like a Glock.
No tool is required but sometimes the slide release lever is a little hard to push out when the gun is new and that creates some problems. Since you have to hold the slide open about an inch and remove the slide release at the same time, if the slide release won't push out, it gets tricky. They tend to loosen up with use. I had one that was really stiff so I just cut a piece of plastic to fit inside the slide and that held it back the distance I needed. All I had to do then was tap the slide release out with something, the handle of a screwdriver works great.
Sounds complex but really isn't. Once you have done it two times, it is not that much harder than taking apart a Glock. After the slide release lever is removed they field strip just like a Glock.
Phoenix_III
Member
Eh, original Poster...
They have a single stack Glock in .45. Glock 36. FYI.
They have a single stack Glock in .45. Glock 36. FYI.
The Reverend
Member
Can't believe it hasen't been mentioned yet...
The Bren 10!!!
In both 10mm and .45
With mags that work and in blued, two-tone, and Stainless Steel.
AWESOME!!!
God Bless
The Bren 10!!!
In both 10mm and .45
With mags that work and in blued, two-tone, and Stainless Steel.
AWESOME!!!
God Bless
Interesting!! I've seen them handled them - never fired. Nice looking but weren't they plagued with ftf's? Other problems too or so I've heard. Anyone have a range report on them? I'm gonna hide now in case Jeff Cooper is reading this............ 
Anthony
Wilson 17&26
Member
A $230, 9oz, 6+1 single stack, 9mm Kel-Tec, true pocket pistol, just a hair bigger than the P-3AT with two magazines. One of those magazines should have a finger extension, so we don’t have to install NAA or Beras extensions on them. Oh, and announce it at the 2006 Shot Show.
No, Glock will never make a pocket pistol, as limpwristing buy purchasers would damage the great Glock reputation. :banghead:
No, Glock will never make a pocket pistol, as limpwristing buy purchasers would damage the great Glock reputation. :banghead:
cidirkona
Member
Jennings 10mm... wouldn't that be a sight to see...
-Colin
PS, +1 on the Keltec P3AT sized 9mm
-Colin
PS, +1 on the Keltec P3AT sized 9mm
cidirkona
Member
Oh, I wouldn't want to shoot it either! --- but man, what a fireworks show that would be!
-Colin
-Colin
cidirkona
Member
I was thinking the slide ripping in half, and the gangsta complaining about how much more he spent on the shiney model or the 10mm ammunition.
On the other hand, I actually WOULD like to see a sub2000 in 10mm.
-Colin
On the other hand, I actually WOULD like to see a sub2000 in 10mm.
-Colin
12-34hom
Member
H&K usp [fullsized] in 10mm.
12-34hom.
12-34hom.
BHPshooter
Member
I'd like to see FN make the Hi Power in single stack!!! 
(still in 9mm, of course.)
Wes
(still in 9mm, of course.)Wes
Ivy Mike
Member
a 10mm CZ.
KadicDeshi
Member
I'd really like a single stack CZ in .45 acp. But I'd settle for a cz 75 rechambered for *shudder* .45 gap.
Barrett
Barrett
robertbank
Member
Para single stack 1911 in 9MM with 10 round mags. Adjustable sights and in Stainless. The 1911 in 9MM is one sweet gun. Have the Trojan and Norinco in this format and need a third. 10 round mags would mag it a fun toy in the shooting games.
Stay Safe
Stay Safe
Hypnogator
Member
A Taurus PT-145 Millennium Pro stainless with hammer and conventional DA trigger, with decocker. Sort of a cross between a Taurus and a Sig -- a Tig!
Oh yeah, bring back the Ruger Speed Six. One of my favorite six guns!
I would also like to see a nice lightweight 9mm snubby that worked without moon clips. A S&W 638 but in 9mm would be the ticket. I would buy one of those for real if it was reliable.
I don't know what the advantage to a P3-AT sized 9mm would be from Kel-Tec. If the .32acp and .380 are any guide to quality and reliabilty, I wouldn't trust it for self defense. Kel-Tec guns are simply not reliable enough to consider for any serious use.
I would also like to see a nice lightweight 9mm snubby that worked without moon clips. A S&W 638 but in 9mm would be the ticket. I would buy one of those for real if it was reliable.
I don't know what the advantage to a P3-AT sized 9mm would be from Kel-Tec. If the .32acp and .380 are any guide to quality and reliabilty, I wouldn't trust it for self defense. Kel-Tec guns are simply not reliable enough to consider for any serious use.
albanian - you Obviously do not OWN a Kel-Tec, do you?
The P11 is The Best in Class of any 9mm Compact Carry Weapon out there for accuracy, light-weight, high capacity and durability...
I OWN One - I CARRY One.
The P32 is of the same caliber - In My Book - as an incredible Pocket Gun...
I OWN One - I CARRY One.
I think it would be wise for people to refrain from negative reviews about a weapon of which one has no personal knowledge.
Just my opinion...
- Status