Playing Outside the Box: Center-Grip Single-Shot 20 BR XP-100 at a PRS Match

Status
Not open for further replies.

xphunter

Member
Joined
Mar 21, 2005
Messages
912
Location
Gillette, WY
Several Saturday’s ago, Dan Ekstrom and I headed over to Sheridan to compete in a one-day PRS shoot, just west of town. The range they have is absolutely beautiful and a picture wouldn’t begin to describe the beauty.
We had 8 to 10 shots per stage on average and most of the time there would be one shot per target for a given shooting position on each stage. PRS matches are known for this and the shooting time is relatively short, especially when using a single shot XP-100. At first, I thought I would use my center grip fast twist 223 HSP, but I was really looking for something that was heavier, and I ended up deciding to use my 20 BR (1-8 twist 15” McGowen barrel/Dell trigger/Aaron Alexander’s stock and brake/Burris XTR-III 3.3-18x50 with SCR MOA reticle) that Aaron built. I use the 55 grain Berger, and the muzzle velocity is at 3173 ft./s. It is extremely accurate.
DseQOVRl.jpg
CzneqJel.jpg
btMNYWgl.jpg

Ckye-Pod bipod, Holland’s small rear field bag, and several PRS type bags were used as well.
I had a lot of fun, there are times when I timed out, and was not able to get to shoot all of my shots, from all of the different shooting positions, but that was OK. I didn’t go to win anything, I went to learn, have fun, to shoot under pressure and time, which involved weird shooting positions. I did come in at the top half of the group (barely), which made me feel good. When we called to ask about whether I could shoot an XP-100 and the 20 BR itself earlier in the week, he was unsure a little bit at first, for several reasons, but allowed me to come and shoot anyway. Now it’s not going to be a problem. The timeframe for each stage was two minutes and 30 seconds for every stage. For instance, on stage one you had to engage from the five different designated positions on the fence and shot each target, which was there two of them one time.
Move to the second shooting position and again shoot those same two targets in the same order, the new to the next place on the fence and do the same.
When I first saw the course of fire several days before the match and noticed on stage eight, where we would be shooting from three different logs, and saw the distances and that there were mule deer, elk, and Whitetail steel targets out there. I thought that one’s going to be easy. To my surprise when I got there, I found out that these animals were more coyote size and did not resemble anything size wise of an actual big game animal except for the outline. I should’ve known better.
For what it’s worth, every animal that was listed as a target, was smaller than its actual size.
These shoots at Sheridan, and at some other places that are within about a 2 or 3 hour drive from Gillette are one day shoots on Saturdays, for the most part. I want to be able to do some more of these in the future. It was just too much fun.
What made it so fun, was the men and women that were participating in it. It was a family friendly environment. A big shout out to Dan. Dan attended this match in March. He’s the one that invited me to come to this one. I wouldn’t have known it was going on unless he had been checking, and had invited me. On a side note, Dan had a rough day, as his gun was definitely having issues, and he has still have not figured it out yet what’s going on with that. When one of Dan‘s guns is shooting an inch and a half group at 100 yards, you know there’s a problem. I also got to see a number of folks from Gillette area as well, and some of them I haven’t seen in several years-Good times.
 
How many people are shooting at the match? I wish I lived about 800 miles closer, it would be a kick in the butt to watch/compete (I love XPs)
 
First of all that is amazing shooting. I couldn't do that with anything I own.

Second, this is an example of shooting should be fun. Many of us take the sport and ourselves too seriously.

Great shooting and keep enjoying our sport.
 
First of all that is amazing shooting. I couldn't do that with anything I own.

Second, this is an example of shooting should be fun. Many of us take the sport and ourselves too seriously.

Great shooting and keep enjoying our sport.

Thanks!
I just like the specialty pistols.
I do have rifles, but I hardly ever use them.
I like the challenge.
I have already come up with a better mousetrap to be more competitive.
A 7T 22GT (Gay Tiger) rear grip specialty pistol, set-up for the 85.5 Bergers', 88 grain ELD-M's, and the 90 grain A-Tips.
 
As I read your post, it just makes me sad that someone in the US, has to have a pistol permit:(
I can't even file for one since there denying everyone, they you have to wait a year and spend the several hundred dollars and get finger printed again and set appointments months in advance. Then get denied again anyway.

Ya lots of crime with one lol, my dad had a nice sling setup on his striker it was very steady to hold standing.
 
What places do short barrels like that?

Any smith who would do your normal chamber work should be willing to cut an SP barrel. I had a Proof Competition Contour cut to 15” to go on our Striker. The photo below doesn’t do it justice, as that barrel is FAT! Before the rail and bipod, with that barrel installed in a new Jim Rockwell stock and beneath a Bushnell DMR II, the pistol weighs just over 10.5lbs!

B9642A2A-789C-40DF-AD51-74C9AFF219D1.jpeg
 
Any smith who would do your normal chamber work should be willing to cut an SP barrel. I had a Proof Competition Contour cut to 15” to go on our Striker. The photo below doesn’t do it justice, as that barrel is FAT! Before the rail and bipod, with that barrel installed in a new Jim Rockwell stock and beneath a Bushnell DMR II, the pistol weighs just over 10.5lbs!

View attachment 1000751

Now VT...You can't just post a picture of the barrel without posting a picture of the finished Striker;)
 
Now VT...You can't just post a picture of the barrel without posting a picture of the finished Striker;)

Forthcoming! Should get the rail mounted tonight or tomorrow, so she’s ALMOST fully converted from her ugly poly stock and skinny factory 243win barrel! So close!

I can tell for certain already, the recoil is going to be MUCH more manageable for my son with all of the extra weight!
 
Probably a good idea since it's a well known fact XPs are used in most street crime.
What an interesting observation. Seems a wise tool based upon its high capacity magazine clips, shoulder thing that goes up, and forward hand grip. Somebody should really get to work on getting that thing off the streets, nobody needs access to that scary thing!
 
Status
Not open for further replies.
Back
Top