thought id offer a tip i learned on the hi power forum about making the creep feel more smooth.
they mention sanding the top edge of the sear spring making the profile rounded as opposed to square with 90 degree edges. that and polishing the bottom of the sear where it contacts the spring.
I tried it on my mkIII HP last night, sanding with 800,1000 then 1,500 grit and followed up with some silver polish.For my gun (with c&s sear/hammer) it really smoothed out that minor creep in the trigger,it was quite noticeable.
they mention sanding the top edge of the sear spring making the profile rounded as opposed to square with 90 degree edges. that and polishing the bottom of the sear where it contacts the spring.
I tried it on my mkIII HP last night, sanding with 800,1000 then 1,500 grit and followed up with some silver polish.For my gun (with c&s sear/hammer) it really smoothed out that minor creep in the trigger,it was quite noticeable.