So long story short, the build is based on a Mega billet lower with a DD rail, an ESS barrel, and Geissele trigger. PSA had an LPK with the trigger I wanted on sale. Everything was put together and seemed to cycle fine. I went to swap my end plate and noticed my buffer retainer wasn't moving up and down. I had to pull it with needle nose pliers. Turns out, it had a flange around the top of where it sits around the spring that was making it stick. Don't ask me how I missed this on initial install. I filed it down and now it seems to function. Yeah, the metal is raw but a drop of oil should take care of that right? Question is, before I stake the castle nut, do I need to be worried about any of the rest of the internals?
The rifle has yet to be fired.
Should I bite the bullet and get a DD/Spikes/Noveske/yourReccomendationHere/etc. LPK? I know plenty of guys run PSA lowers, and was planning on building my next that way. Now, not so sure.
Thanks in advance,
1894
The rifle has yet to be fired.
Should I bite the bullet and get a DD/Spikes/Noveske/yourReccomendationHere/etc. LPK? I know plenty of guys run PSA lowers, and was planning on building my next that way. Now, not so sure.
Thanks in advance,
1894