Reload Data 10MM Auto

[coonan1911]

Hi All,

I am having problems finding reloads for Frontier coated 165g TMJ & 200g / 170g coated lead projectiles. Most of my loading manuals are only giving me powder loads which we can't buy here and the few I can find are giving me deference grain weights which I haven't got.
If anyone on the forum may have some mainly on the lead coated projectiles would be most appreciated.
I have in the way of powders Alliant Green / Blue Dot / Unique / Some American Select / Bull eye & some power pistol. The others we mostly use here like ADI Powders AP100 / AP 70 / AP 50 / AS30 and some old deleted type AP90.
Regards
coonan1911

 

[kerreckt]

You might try this: http://www.handloads.com/
Then look at loaddata database
Hope this helps....Best wishes

 

[coonan1911]

Reload Data for 10mm

Thanks again for the reply and the information.
It must be a odd calibre 10mm as i could only find 1x load in lead which was 170g FP using ADI AP 70 Powder and all the rest were odd powder that we can't get here. Well thanks again . I will just keep looking until some long old reloader who been loading cast lead and coated cast bullets for centuries might post some good loads.
See Ya later

 

[Peter M. Eick]

www.glocktalk.com has a specific 10mm reloading forum with lots of tested data. You might try there for some of the different powders you mention.

 

[Havok7416]

170 grains is an odd bullet weight for 10mm. You are more likely to find data for 155, 165, 180 and 200.

 

[rcmodel]

Lyman #49 lists two 175 grain bullets in 10mm.
One has two grease grooves:

You can safely use the date with your 165 - 170 grain bullets.
Bulls Eye 5.5 - 6.5
Unique 6.1 - 7.0
Power Pistol 7.4 - 8.3
Blue Dot 9.0 - 10.4

rc

 

[Havok7416]

I will add to RCs information that the Unique will produce a reduced load from my experiences with it. Still safe to shoot if worked up properly, but just an FYI.