I searched for this and have heard nothing but good about Ruger P89's but I have had a failure to eject about 10 times now after about 700-800 rounds through the gun. I don't know if this is common or strange. I have tried just cheap stuff and it always happens with brass. I have run blazer aluminum without a problem. i cleaned the gun and reoiled it and still have the problem. any suggestions would be appreciated. thanks.
RUGER P89 FTE now about 10 times
- Thread starter gaspony
- Start date
- Status
Whirlwind06
Member
Make sure that you cleaned out the gunk under the extractor.
Maybe even use some type of spray solvent / cleaner to make sure you get the gunk behind the extractor.
Maybe even use some type of spray solvent / cleaner to make sure you get the gunk behind the extractor.
Gaspony-I can't give you a suggestion other than maybe trying different ammunition-but if you go to RugerForum.com there is a lot of information specifically about Ruger P series Pistols. There is a member there named Coffeepot that worked on the P-series for Ruger. He knows these guns inside & out. You might want to post your question there.
boomer1911a1
Member
Also make sure your grip is good, strong , and proper. A loose hold ("limp-wristing") will cause any automatic pistol problems...
- Status