Benjaminben
Member
- Joined
- Dec 3, 2008
- Messages
- 4
Hi All
I just registered and hope this post is in the proper forum. I have a S&W, model 19 I think. Gun unloaded!!When the trigger is pulled with the hammer cocked, the trigger kicks forward as the hammer falls. I purchased the gun new a few years ago and have only fired about 100 rounds thru it. It has always had a fine trigger pull. It has a target trigger and hammer!. I have removed the sideplate and everything looks fine.
When reassembled the trigger works fine for about 10 actions then the trigger kick begins again.
any suggestions!
BB
I just registered and hope this post is in the proper forum. I have a S&W, model 19 I think. Gun unloaded!!When the trigger is pulled with the hammer cocked, the trigger kicks forward as the hammer falls. I purchased the gun new a few years ago and have only fired about 100 rounds thru it. It has always had a fine trigger pull. It has a target trigger and hammer!. I have removed the sideplate and everything looks fine.
When reassembled the trigger works fine for about 10 actions then the trigger kick begins again.
any suggestions!
BB