Starting Load

[twin rivers]

Not sure what to use for a starting load with Acme 124gr rn. coated bullets. I need a 1.070 oal with my cz 9mm and using winchester 271 powder. Thanks for any help.

 

[dgod]

Check These Out...
http://www.hodgdonreloading.com/
https://loaddata.com/
https://load-data.nosler.com/
http://www.accuratepowder.com/wp-content/uploads/2011/01/accurate_load_data_3.5.pdf
http://www.handloads.com/
http://www.vihtavuori.com/en/rifle-reloading-data
http://www.gun-shots.net/reloading-data.shtml
http://www.alliantpowder.com/reloaders/default.aspx?page=/reloaders/RecipeList.aspx&

Downloadable Booklet:
http://pdf.textfiles.com/manuals/FIREARMS/imr_reloading.pdf

Hope this Helps..

 

[twin rivers]

Check These Out...
http://www.hodgdonreloading.com/
https://loaddata.com/
https://load-data.nosler.com/
http://www.accuratepowder.com/wp-content/uploads/2011/01/accurate_load_data_3.5.pdf
http://www.handloads.com/
http://www.vihtavuori.com/en/rifle-reloading-data
http://www.gun-shots.net/reloading-data.shtml
http://www.alliantpowder.com/reloaders/default.aspx?page=/reloaders/RecipeList.aspx&

Downloadable Booklet:
http://pdf.textfiles.com/manuals/FIREARMS/imr_reloading.pdf

Hope this Helps..

Thanks for the information.

 

[Walkalong]

271? or 231?

 

[twin rivers]

271? or 231?

Sorry, should have been 231.

 

[Walkalong]

Copied and pasted from the Hodgdon link. For 125 Gr lead, which you can use for a coated bullet.

Manufacturer Powder Bullet Diam. C.O.L. Grs. Vel. (ft/s) Pressure Grs. Vel. (ft/s) Pressure

Winchester 231 .356" 1.125" 3.9 1,009 25,700 CUP 4.4 1,086 31,200 CUP

Back off max a bit with your shorter OAL.

 

[twin rivers]

Copied and pasted from the Hodgdon link. For 125 Gr lead, which you can use for a coated bullet.



Back off max a bit with your shorter OAL.

Thanks, I will try that. I loaded some at 3.4-3.6-3.8 see how that goes.