reasonable progressive press to prep and prime all my pistol brass ... decap resize, expand and prime thats it.
I would highly recommend 2023 version of Lee Pro 1000 with new priming system (Similar to Pro 6000) that will work with any brand primer (Including slightly larger Metric sized primers) -
https://www.thehighroad.org/index.php?threads/new-2023-gen3-lee-pro-1000-unboxing.916672/
The new priming system readily seated different brands of primers to around .004" below flush down to last 3 primers and with a light tap on the chute, fed the last 3. Also, having the case feeder will speed up the process. (Don't forget to mod the case collator with drilled penny and spent 22LR casing to prevent upside .380Auto/9mm cases)
This is repost from above thread -
https://www.thehighroad.org/index.p...3-lee-pro-1000-unboxing.916672/#post-12567479
Spent the morning with the new primer system and found primer chute/trough will reliably feed primers down to last 3 primers and with the primer guide in front of chute/trough opening, I could tap on the chute to feed the last 3 primers.
Seated CCI/S&B/PMC/TulAmmo SP primers in various headstamp brass (Blazer/.FC./R-P/R-P"."/WIN/FC/G.F.L. pictured) and they fed reliably 100%.
With moderate pressure on the ram lever, primers were seated to .004"-.005" below flush with most seating around .004".
WIN/FC brass were seated with S&B primers using moderate/firm pressure and primers were seated to .004" and .005" below flush.
This is the new priming system similar to Pro 6000 that uses sliding primer guide. With a light tap on the chute, it will feed last 3 primers in the chute.