Recent content by Busyhands94

I've made a "white trash furnace" before. What I did was built up a dirt mound about three feet high, dug a hole in the center. I ran a 2" steel pipe down into the hole from the side, sort of like a giant corncob pipe. Got some hardwood charcoal and a shop vac and attached the hose to the...

I shoot at a good non-profit gun club, if I ask the rangemasters or the club president if I can mine the berm after everybody is done, they don't think twice about saying yes. And they always point me to where people are usually shooting their .45's so I can get plenty of soft lead. It pays to...

I'm 20 and I still remember those cartoons! :D They showed them on Cartoon Network when I was a youngern'. Definitely not P.C. by today's standards. But these were made back in the day when kids knew to not try the stuff they saw Wiley Coyote do. People tell me I turned out old fashion. :D I...

Hombre, let us know how they perform. I might make some .450 conicals with some birdshot in the tip when I get more glue. I'd love to see how they perform!

I tried this yesterday with some military .38 cases, some Cheddite shotgun primers, and some bullets I made with hotglue sticks in my 140 grain SWC mold. These would be really great for mice and rats, those glue stick bullets came out with quite a bit of authority. I bet you could blow apart the...

This has certainly gotten my attention, I'm gonna get more glue sticks next time I'm in town!

I too, haven't been able to find any rimfire ammo in my neck of the woods. I've gone from simply frustrated, to infuriated. We all know who's to blame here. I've been loading a lot of .38 Special, .32-20, .30-30, and .410 slugs to use as plinking ammo. The .38 and .32-20 get loaded with BP most...

I've loaded .22's with BP before, I used both FFFG and FFFFG. I've also loaded .32 S$W, .32 S&W Long and .32-20 with BP. For .32's I use FFFG.

Willie, I'm using a Hornady scale. I bought it on sale at Bass Pro for $25, best $25 I've ever spent. :D Before I was using a head shop scale, I'd used it too long and it was time for an upgrade.

If I were comparing powders to booze, 4F would be beer, Triple Seven would be Jim Beam, and Bullseye would be Everclear. ;) 4F gives a good boom, smoke but only about 400 FPS of muzzle velocity. Bullseye gives you three times the velocity, and your bullets actually expand.

For a period of time, my NAA companion was pretty much my only defensive gun. I reckon I've spent more time experimenting with loads for that gun than most men should. But they are fantastic little revolvers, you can take them anywhere you can carry a gun, and mine has certainly lived up to the...

Kbob, I've done some experimenting with #8 shot loads from my magnum frame. I load 1 grain of Bullseye or 2 grains of Triple Seven, some printer paper wadding, a pinch of fine birdshot, and a little bit of paper on top to keep the shot from falling out. Remington #10 caps for ignition. My...

I've got experience with both the LR and magnum frame NAA cap and ball revolvers, they're fun lil' pistols and quite useful! I load my magnum with 2.0 grains of Alliant Bullseye, the LR frame gets a charge of 1.0 grain of Bullseye. I'm getting close to 1000 FPS with the LR, 1200 from the magnum...

I use nickle cases for my BP .38 Special cartridges, they hold up pretty well and are easy to clean. I put all my empty brass into a quart mason jar, when I get home I cover the cases with hot water and white vinegar. I shake the brass a whole bunch, pour out the liquid, and let them dry on a...

I've got an H&R 622, but my friend gave me a 9 round cylinder (he's got him a couple 922's and had a spare cylinder) and it just dropped in like it was made for it! I'm considering having the 6 round cylinder reamed to .22 magnum, that way I can use the 9 round cylinder for .22LR's. ;)