mdi's latest activity

  • mdi
    mdi replied to the thread RCBS Bench Primer Handle.
    I would use that model. Looks waaaay more user friendly.
  • mdi
    mdi replied to the thread RCBS Partner Press shell holders?.
    Lee die sets come with "universal" shell holders of the appropriate caliber for the set. I've used 6 different presses and Lee shell...
  • mdi
    mdi reacted to .38 Special's post in the thread Bullet fitting question with Like Like.
    I'm not sure that gas leakage is behind the pressure reduction, but rather the effort it takes to engrave the bullet. Either way, I...
  • mdi
    mdi reacted to Bush Pilot's post in the thread Another disappointing die purchase with Like Like.
    Maybe the box IS made in the US.
  • mdi
    mdi reacted to Palladan44's post in the thread Another disappointing die purchase with Like Like.
    I know it's new and shouldn't put scratches in your brass, but I'd just try polishing it. I cut a piece of t-shirt and grab an old .357...
  • mdi
    mdi replied to the thread Another disappointing die purchase.
    It would be an easy task to polish out the die ID, but you shouldn't have to do that to a new tool. I believe I would send the die back...
  • mdi
    mdi reacted to Soonerpesek's post in the thread What's up with the Lewiston brass? with Like Like.
    Can you pull the bullets, resize with no decapping pin, and seat without expanding............???
  • mdi
    mdi reacted to gwpercle's post in the thread 44 special with Like Like.
    In the 44 Special ... a 250 gr. cast SWC and 6.0 grs. Unique @ 750 fps will duplicate the original 44 Special load , and one of my...
  • mdi
    mdi reacted to PapaG's post in the thread 44 special with Like Like.
    Buy and use a good manual. Use starting loads.
  • mdi
    mdi replied to the thread Primer anvils??.
    I bought a primer reloading kit and "renewed" a few out of curiosity. I believe I would go with flint locks or air guns before I tried...
  • mdi
    mdi reacted to Walkalong's post in the thread 10% over max powder? with Like Like.
    How? If the factory doesn't verify it's cannister N-140 sold to reloaders, you can't be sure.
  • mdi
    mdi reacted to Rule3's post in the thread 10% over max powder? with Like Like.
    UR reverse engineered a Remington Match factory round that they were very impressed with, which uses that same bullet, and found it used...
  • mdi
    mdi replied to the thread Small or Large Pistol Primer.
    CQB45ACP's pic is an excellent example. Not being a jerk, but "just look at them" is good advise. I have been a machinist/mechanic most...
  • mdi
    mdi reacted to 41 Mag's post in the thread Unique powder with Like Like.
    Follow the recommended info on the page before the load data...
  • mdi
    mdi reacted to Soonerpesek's post in the thread Unique powder with Like Like.
    Usually when the manufacturer lists only 1 weight, it’s the max and you can reduce by 10% to start….
Show older items
Back
Top