Liberty Safe Problem

Wow, sorry you had to go through that. Honestly, I've really never given it any thought about my safe not working, untill your post. I just took it for granted that it will open every time. You said they turned the safe on its side to fix it. Was your guns in there when they did this Hope not.

I believe Liberty Safe is made in Communist China where there is no liberty. I avoided Chinese when I bought my safe for just this reason. I figure if all other products from China are cheaply constructed, wouldn't their safes be also? Then, from an existentialist viewpoint, I could never swallow Safe names like Liberty, Patriot, and undoubtedly others that trumpet concepts unknown in that totatlitarian distopia. Aren't the Chinese manufacturing a super aircraft carrier out of the profits of their exported safes?

Sorry to hear about your problems. I'd say obsess on origin of manufacture on all items purchased henceforth.

"Made in USA
All Liberty and National Security safes 23 cubic feet and larger are made in the USA."

Directly from their website!!!!!!! American made and I really like mine. If I were the OP and had that problem, I would have contacted Liberty directly. Their safes carry a lifetime warranty!!!

"Liberty Safe and Security Products Warranty
Liberty Safe and Security Products warrants each new Liberty, National Security or Centurion safe or vault door will be free from defects in material and workmanship for the lifetime of the original owner excluding the lock.

If there is a defect in either materials or workmanship of the locking mechanism during your lifetime, we will fix it *free of charge. Liberty will also repair or replace your safe *free of charge if it is damaged during a fire, a break-in or break-in attempt during the lifetime of the original purchaser. There are no hidden expenses with Liberty's limited lifetime warranty, no charge for opening the damaged safe, no charge for freight, and if the safe needs to be replaced, no charge for the replacement safe in your home. When the unthinkable happens, you want to know that your safe is backed by a reputable company, and a warranty is only as good as the company behind it.

Liberty, National Security and Centurion mechanical locks will be repaired or replaced free of charge, including labor, for the first five years of ownership. After five years and for the life of the original owner, Liberty will replace the parts *free of charge. Electronic locks are covered for five years.

Liberty Safe and Security Products warrants the painted surface of the safe with a limited lifetime warranty.

Liberty Safe and Security Products warranty is transferrable.

See written warranty for complete details."

Another quote from their website...Please don't spread 'rumors' about things you don't know!!!

In this case you are lucky you hadn't bolted your safe to the floor.

This is not an unheard of problem, even with some of the other manufacturers.

Believe it or not, many of the Chinese safes being imported are built better than some of the US made stuff. This is mainly because the US built stuff has had many corners cut in order to drop the price.

This isn't a result of cheap Chinese competition, but rather cheap gun owners. We field countless calls from guys with $20,000 gun collections who only want to spend $500 on a safe. These companies are only building what the consumers are willing to pay for, and as a result, quality suffers.

Then again, safes are mechanical objects. Even the good ones break sometimes, that's just the way it is.

I'm glad it wasn't full of guns and/or bolted as it would have resulted in having to drill a hole in a visable area. I'm also glad they were able to open it easily. I do warranty work for Liberty, and they do stand behind their product.

The Chinese build things to whatever spec we tell them to.

As for them building a 'supercarrier', there's a big difference between having a huge flat top, and having the aircraft, technology, and support to use it to project globally. (Not to mention prevent us from broadsiding it with four torpedoes anytime we feel like it.)

I would have called Liberty, if they do indeed have a lifetime warranty.

If you look behind the door panel, the locking mechanism of most gun safes is a real letdown. I think most people are expecting to see an elaborate series of giant gears and full length bolts like you see in bank vaults.

I think you should push the issue with them. Just like a number of other industries, the first response is often a no, hoping that you will just go away. I have had calls that required less than 2 minutes of my attention, where the safe owner could have corrected the issue themselves. By complaining loudly enough, the manufacturer paid me to go out.

A quick funny story about Liberty. I got a call from them for a lock failure on a display safe at Cabela's. It was their top of the line safe, equal to the Presidential, with ball bearing hardplate. The Liberty rep said he would fax me the information I needed in order to drill.

The fax was a copy of a page out of a book written by an independant safe tech. Apparently us safe guys know more about Libery safes than the guys at Liberty.

Although I'm not impressed with much of what Cannon sells, Fort Knox does make some nice safes.

I took a older Fort Knox in on trade a few years ago. Somebody attempted to break into the safe by turning the handle too hard, and similar to your Liberty, the handle would no longer open the door. Another safe tech had already drilled the safe to get it open.

All I had to do was replace a 20 cent roll pin which was designed to sheer if the handle was forced. Sounds simple, right? Everything inside of that door was welded in. Nothing came out through normal disassembly. It took me about 2 hours to grind out the welds on the parts I needed to remove, 30 seconds to replace the 20 cent roll pin, and another 2 hours to weld and grind everything back together.

If I had been working on your Liberty, I would have repaired it slightly differently. I would have drilled a hole through the collar and the spindle, and inserted one of those roll pins. It is stout enough to operate the boltwork, but will sheer under too much pressure.

Liberty Sucks

Bought high end safe and it wouldn'y open. Opening day of buck season came and went and no customer help. The season is almost over and no help. I live out in the sticks so they won't help.

Don't purchase their safes because their customer service is horrible. A gey from Sacrmaneto said he was coming up and would call so I took a few days off work and he didn't show. Imagine that!

Stuff breaks. Call, complain, repeat until warranty is honored.

The way some people think, if something breaks, it's a bad design. Lots of things break, especially stuff we don't ever think about, like the mechanism behind the door panel of our safe.

As for them building a 'supercarrier', there's a big difference between having a huge flat top, and having the aircraft, technology, and support to use it to project globally. (Not to mention prevent us from broadsiding it with four torpedoes anytime we feel like it.)

Click to expand...

Reading that could just be the highlight of my day.

Thinking of buying a safe. Willing to spend a good deal, need a big one. If not Liberty, then who?

Edit: Think I will read this: http://www.thehighroad.us/showthread.php?t=408858 first. Couldn't find it and then I realized it might be on the "mirrorish" site.

What about American Security (AmSec) safes? Anybody have experience with them?

Batteries!

I've have a Liberty Centurion Safe with an Amsec digital lock. I went to unlock and it would not engage (the keypad was fully functional ...red lights and beeps). I assumed that this ruled out any battery issues. I shook the safe, pounded the door, rocked the safe for hours with no luck. Decided to try replacing the batteries. I used some off-brand ones that I have as smoke detector spares- that didn't fix it. Finally, I replaced those cheaper batteries with Duracell batteries and it opened right up!

jasper275 said:

I believe Liberty Safe is made in Communist China where there is no liberty. I avoided Chinese when I bought my safe for just this reason. I figure if all other products from China are cheaply constructed, wouldn't their safes be also? Then, from an existentialist viewpoint, I could never swallow Safe names like Liberty, Patriot, and undoubtedly others that trumpet concepts unknown in that totatlitarian distopia. Aren't the Chinese manufacturing a super aircraft carrier out of the profits of their exported safes?
Sorry to hear about your problems. I'd say obsess on origin of manufacture on all items purchased henceforth.

Click to expand...

From other profit sources as well.
Perhaps the carrier will have to be turned on its side and whacked with a mallet to make it work, too.

I have two safes. Liberty, 25 cu.ft. bought in 1996 and a American Security 25 cu.ft. bought around 1992. Both have functioned perfectly.

RainDodger said:

What about American Security (AmSec) safes? Anybody have experience with them?

Click to expand...

AmSec (the small ones) were specifically mentioned as not good in the youtube analysis video by Mark Tobias. I just watched the whole thing again yesterday in addition to the one from DefCon, to finally make a decision. I went with Ft. Knox. Very sad that FAS 1 is not California DOJ approved, I don't understand how DOJ even make their list but what can I do.

I spent a lot of time researcbing safes and bought a Sturdy safe. I couldn't be happier and strongly recommend them every chance I get.

Sulaco said:

I spent a lot of time researcbing safes and bought a Sturdy safe. I couldn't be happier and strongly recommend them every chance I get.

Click to expand...

I don't know if I can support that recommendation... I mean, it says "turd" right in the title

So you don't think Sturdy makes a good safe? Compared to what?

.
That was a turd joke, son.


I was looking at Sturdy Safes but found a great price on a demonstrator American Security.

One of the things that nobody has mentioned (unless I missed it) was the plastic dials/keypads on the electronic safes. I have personally heard of 6 cases where the owners had a house fire and the dial melted off, leaving a very large "anchor"! The safe had to be cut/torched to get it open, destroying them. In the larger two, the contents were still in fair to good condition, but the other 4 were less than 15 cu. ft. in volume and had major damage to the contents.

I bought a non-gun safe from a used safe company in St. Louis (a1abdj - I'm sure you know the one - "B") that has a mechanical mechanism and is a steel & cement laminate. Its weight makes bolting down unnecessary as well. The bolt handle is held on the outside with a single Allen bolt that makes it easily removed and hidden if I'm gone for any length of time.

If you want "bulletproof" boltwork, go with a Sturdy safe. I purchased one after looking carefully at how the bolts were attached and supported. Shiny bolts often are attached with one screw in many RSC "safes".