Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old High Contrast theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
Have a Benelli MP95E that was doing fine then all of a sudden it's having extraction problems. The empty case is stuck half in & out of the chamber, some times the case is sideways, with the action half open. I've changed the return spring and extractor along with cleaning the chamber. Has...
I have a friend in the Canada who has a Beretta 1934 in 9mm. ( he bought in 1963 when he was stationed Cape Town Africa) He was informed by the RCMP and local police that he will have to turn it in for destruction if he can not put a longer barrel on it. It has the original 3 3/8 inch barrel...
A customer brought in an old S&W 67 C 12 gage that was fired with a mud plugged barrel, needless to say the first 3 inches peeled like a banana. I have a new barrel on hand but would like to know if it was threaded with or without any type of thread locker. I can guess I'm headed for some busted...
Hey Gents,
A Browning BDM came into the shop today for a detailed cleaning, this is the model with the selector on the slide for "pistol or revolver" trigger action.
This has sat in the box for a long time and is a little rusty with a few spots of rock hard dried up grease. This is the...
My brother showed me a Remington 572 Field Master, one that I never knew exsisted. The barrel and reciever are a brown/red in color and looks like anodizing and the barrel is made of magnesium. It's super light and in excellant shape. Does anyone have any info on this.
Thanks.
Guns - out
I have a few 1911 slides with narrow tennone, afew front sigts with wide tennons. Is there any special trick then just opening the slot on center. Is there a tool (wizbang) that I may not know about The story is I have a bunch wide tennon front sight and narrow slides
Thanks.
Joe
Gentlemen,
I'm in need of a sear for a savage 93 and the usual places do not have any in stock. I've posted on the items for sale or trade venues with no luck. Any one have on they want to part with?
Thanks.
Guns - out
I have a 20 gage remington model 17 pump shot gun in very good shape. I have no info on this but do know not to fire plastic shells in it. I still have a bunch of paper hull shells from my father in law that I use. I want to start clearing out the old gun locker and I'm wondering if it's worth...
I'm reassembling my Ithaca 37. The problem I've run into is where should the longer leg of the slide stop release spring go ?, does it rest on top of the rear portion of the slide stop. Also my hammer bar likes to fall off the face of the mainspring cup after I pull the trigger. The gun is old...
I have a Rem model 17 20ga. I don't know much about it and it seems like a sweet gun to shoot. It is in good to very good shape. Any one have any experience with them. I got it for $75.00 about a year ago and haven't done much with it except keeping it oiled and clean
Has any one run into the problem with the Mossy 935 owners manual and how the actual gun is built. The reason I'm asking is because the gas system on the gun and whats in the manual are different. I got the gun in peices and want to reassemle it correctly.
I had a friend bring me his Mossy 935 in pieces. What confused him, and me, was the operators manual didn't match his shotgun. It appears the manual shows an older model 935 with out the heavy spring in front of the piston and seal also, he had a new rubber o-ring in a package to replace the old...
I just picked up an old CD 12 gage O/U cheap because the hammer spring for the top barrel is broke. I'm not familiar with CD's and it's a lot different the my mossberg silver. Does anyone know where I can pull off some detailed disassembly instructions or a schematic from the web.
Thanks...
I need to replace the upper hammer spring on a CD O/U 12 ga. I've never worked on a CD before. Does any one know where I can find a schematic on line.
Thanks.
I'm not familiar with the new Remington extractor. I was told that this is a factory repair item only. If this is true?, can you convert to the old rivet type extractor if needed.
Thanks.
Hey Gent's,
Where is a good place to find some info on a 218 Bee, Beasly target rifle. I've never seen such a thick barrel on a small caliber rifle before.
Thanks in advance
:confused:What can a retired LEO do to get the FID card, required to carry across state lines If the department doesn't have the facility's or desire to issue one.
Strange thing happened today at the range. All of a sudden my accuracy went to hell, thinking it was a scope gone bad until I walked down range to view my target. My rounds had impacted sideways and appear to be tumbling.
Now this is Radway Green 7.62 ammo, had been using for the last month...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.