BTW: I solved my issue with the case feeder spring bending and partially solved the issue with the slider dragging cases back.
I lubed the rail that the slider rides on. What was causing the spring to bend was the hesitation of the slide to move out when handle was pulled back, caused by drag...
Depends on the resources available to him
I'm finally getting a friend into reloading, because he got tired of not being able to buy on-line. We evaluated his goals and interest levels and we settled on his first press being a progressive. He was considering the Dillon 750 and the Hornady LNL...
It would really help folks understand the issues you're having if you either post videos or offer more detailed descriptions of what is frustrating you.
I'm well into my second thousand .45ACP on the Pro 6000 and haven't offered any solutions as I haven't encountered the issues you seem to be...
My standard is SPP, because I have so much more SPP than LPP.
The other advantage is that if a LPP case sneaks in, I don't damage the SPP trying to prime it...I can feel the difference and just pull out the LPP case before I drop powder in it.
The only LPP .45ACP cases I keep are Starline...
I use NuFinish straight from the bottle
You're likely adding your cases too early.
You need to load your media first and turn on your vibrator. Once it get going, you can add your capful of polish. Let that run about 20 mins to get spread around the media before adding your cases. The time...
That is pretty old technology. I remember it being very popular back in the 70s for short barreled revolvers where you weren't likely to get much velocity. The issues folks ran into was unreliable/inconsistent expansion and poor accuracy
Since that time, the study of fluid dynamics has made...
My error. Since the thread title was asking for recommendations for the best speed loader for Glock Magazines, I was focused on that subject and completely missed that that you were relating your experience with a completely different platform
Other members have given you good advice about transporting handguns in a vehicle. It really isn't that complicated, unless readers want to make it such...much like the folks who wrote the above.
"Directly to the range and back" is either a misunderstanding of the section about transporting the...
I can understand that the Makershot meets your needs, but your rant seems a bit over the top. For what it's worth I have stood on my UpLula and it's been run over by a car without affecting continued function.
One of the largest advantages of the UpLula is that it depresses the follower from...
That was fairly common due to the low magazine capacity of the 96. While 92 mags would hold at least 15, most 96 mags held 10 unless you wanted to hunt down the 11-round ones
In center fire there is some, ranging from barely noticeable to quite a bit depending on caliber
I rim fire, the differences are huge. You can easily see the difference on target...even between different lines within the same manufacturer
What issue are you running into with the Seating die?
I've seen the Deluxe set and the only difference between it and the regular die set is that it include a third die for neck sizing
The Seating die included in the set is the regular Seating die...which you would set up as you would any...
I have done this also
I've used M-profile expanders from Lyman and Redding. I've used expanding inserts from DAA, Lee, and RCBS on various presses over the years
Thank you, very interesting. Your pictures clearly show all the high lights of the third gen
I knew there were three generations, but didn't realize how evolved the third generation really was.
1. The open fingers of the slide make complete sense with the inclusion of the gate on the new case...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.